Workholding - Clamping & Fixturing - Flat Stock & Shims - Flat Stock - (3617 Products)
3/4 x 3-1/2 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8055024
Manufacturer: Starrett
Mfg #: 55024
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 3/4
*Width: 3-1/2
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 17.8500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 5/16 x 4 - Oversize Air Hardening Flat Stock
Item #: LY4656917
Manufacturer: Starrett
Mfg #: 56917
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 5/16
*Width: 4
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 13.4400
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1 x 2-1/2 x 18 - Oversize Air Hardening Flat Stock
Item #: LY4657648
Manufacturer: Starrett
Mfg #: 57648
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 1
*Width: 2-1/2
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 12.7500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1/16 x 3 - Air Hardening Flat Stock
Item #: LY4557308
Manufacturer: Starrett
Mfg #: 57308
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 1/16
*Width: 3
Description:
*A-2 Air Hardening Ground Flat Stock 36" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - 1.9300
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1 x 1-1/2 x 18 - Oversize High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4369474
Manufacturer: Starrett
Mfg #: 69474
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: D-2
*Thick: 1
*Width: 1-1/2
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 7.6500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/8 x 3 x 18 - Oversize High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4369429
Manufacturer: Starrett
Mfg #: 69429
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: D-2
*Thick: 3/8
*Width: 3
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 5.7400
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-1/2 x 2-1/2 x 18 - Oversize Air Hardening Flat Stock
Item #: LY4657666
Manufacturer: Starrett
Mfg #: 57666
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 1-1/2
*Width: 2-1/2
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 19.1200
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1 x 1-1/4 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8055042
Manufacturer: Starrett
Mfg #: 55042
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 1
*Width: 1-1/4
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 8.5000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 3/16 x 5 - Air Hardening Flat Stock
Item #: LY4554575
Manufacturer: Starrett
Mfg #: 54575
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 3/16
*Width: 5
Description:
*A-2 Air Hardening Ground Flat Stock 36" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - 9.6700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1/2 x 1-1/4 - Oversize Air Hardening Flat Stock
Item #: LY753205
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: A-2
*Thick: 1/2
*Width: 1-1/4
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 6.6700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/8 x 1-1/2 x 18 - Air Hardening Flat Stock
Item #: LY4556502
Manufacturer: Starrett
Mfg #: 56502
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 7/8
*Width: 1-1/2
Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Standard size: +/-.001" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*Ground straight and parallel
Shipping Info:
*Actual Weight - 6.6900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/32 x 1-1/2 x 36 - High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4269269
Manufacturer: Starrett
Mfg #: 69269
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: D-2
*Thick: 5/32
*Width: 1-1/2
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 2.3900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1/8 x 1-3/4 - Oversize Air Hardening Flat Stock
Item #: LY75808
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: A-2
*Thick: 1/8
*Width: 1-3/4
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 2.5000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 5/16 x 3 - Oversize Air Hardening Flat Stock
Item #: LY702010
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: A-2
*Thick: 5/16
*Width: 3
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 5.0400
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 5/16 x 2-1/2 - Oil Hardening Flat Stock
Item #: LY4054108
Manufacturer: Starrett
Mfg #: 54108
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 5/16
*Width: 2-1/2
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 4.0300
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/16 x 1 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4458973
Manufacturer: Starrett
Mfg #: 58973
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 3/16
*Width: 1
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - 1.9100
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/8 x 7/8 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8055032
Manufacturer: Starrett
Mfg #: 55032
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 7/8
*Width: 7/8
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 5.2100
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8 x 1-1/2 x 18 - High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4269123
Manufacturer: Starrett
Mfg #: 69123
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: D-2
*Thick: 1/8
*Width: 1-1/2
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - .9600
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8 x 3-1/2 x 36 - Oversize Air Hardening Flat Stock
Item #: LY4656946
Manufacturer: Starrett
Mfg #: 56946
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 5/8
*Width: 3-1/2
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 22.3100
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 3/16 x 4 - Oversize Air Hardening Flat Stock
Item #: LY4656902
Manufacturer: Starrett
Mfg #: 56902
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 3/16
*Width: 4
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 8.2700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It