Workholding - Clamping & Fixturing - Flat Stock & Shims - Flat Stock - (3617 Products)
36 x 1/4 x 3 - Oversize Oil Hardening Flat Stock
Item #: LY4156830
Manufacturer: Starrett
Mfg #: 56830
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 1/4
*Width: 3
Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock
*Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis
*Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools
*Width +.010/.015
*Thickness +10.010/.015
*Squareness edge to surface .003 per inch of thickness
*Finish 10-25 micro inches
Shipping Info:
*Actual Weight - 8.1500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/8 x 7/8 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4459036
Manufacturer: Starrett
Mfg #: 59036
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 3/8
*Width: 7/8
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - 3.3500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8 x 5 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8054903
Manufacturer: Starrett
Mfg #: 54903
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 1/8
*Width: 5
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 4.2500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8 x 12 x 18 - Oversize Air Hardening Flat Stock
Item #: LY4657558
Manufacturer: Starrett
Mfg #: 57558
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 1/8
*Width: 12
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 7.6500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 1/4 x 1/4 - Oversize Oil Hardening Flat Stock
Item #: LY4156971
Manufacturer: Starrett
Mfg #: 56971
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 1/4
*Width: 1/4
Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock
*Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis
*Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools
*Width +.010/.015
*Thickness +10.010/.015
*Squareness edge to surface .003 per inch of thickness
*Finish 10-25 micro inches
Shipping Info:
*Actual Weight - .3600
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/16 x 8 x 18 - Air Hardening Flat Stock
Item #: LY4557522
Manufacturer: Starrett
Mfg #: 57522
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 3/16
*Width: 8
Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Standard size: +/-.001" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*Ground straight and parallel
Shipping Info:
*Actual Weight - 7.6500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1/8 x 4 - Oversize Air Hardening Flat Stock
Item #: LY75813
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: A-2
*Thick: 1/8
*Width: 4
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 5.6900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/32 x 1 x 18 - Oversize High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4369380
Manufacturer: Starrett
Mfg #: 69380
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: D-2
*Thick: 5/32
*Width: 1
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - .8000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/32 x 10 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8058286
Manufacturer: Starrett
Mfg #: 58286
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 3/32
*Width: 10
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 6.3700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/16 x 2-1/2 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4458978
Manufacturer: Starrett
Mfg #: 58978
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 3/16
*Width: 2-1/2
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - 4.7800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1-1/8 x 3 - Oil Hardening Flat Stock
Item #: LY4054516
Manufacturer: Starrett
Mfg #: 54516
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 1-1/8
*Width: 3
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 34.8100
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/4 x 5 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4459004
Manufacturer: Starrett
Mfg #: 59004
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 1/4
*Width: 5
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - 12.7500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-1/2 x 4 x 18 - Air Hardening Flat Stock
Item #: LY4554848
Manufacturer: Starrett
Mfg #: 54848
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 1-1/2
*Width: 4
Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Standard size: +/-.001" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*Ground straight and parallel
Shipping Info:
*Actual Weight - 31.0500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/32 x 5/8 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4458929
Manufacturer: Starrett
Mfg #: 58929
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 3/32
*Width: 5/8
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - .6000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1/2 x 1 - Oversize Oil Hardening Flat Stock
Item #: LY4156860
Manufacturer: Starrett
Mfg #: 56860
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 1/2
*Width: 1
Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock
*Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis
*Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools
*Width +.010/.015
*Thickness +10.010/.015
*Squareness edge to surface .003 per inch of thickness
*Finish 10-25 micro inches
Shipping Info:
*Actual Weight - 5.3500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1/8 x 3/4 - Oversize Air Hardening Flat Stock
Item #: LY4657355
Manufacturer: Starrett
Mfg #: 57355
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 1/8
*Width: 3/4
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 1.0800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/8 x 1-1/2 x 36 - High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4269313
Manufacturer: Starrett
Mfg #: 69313
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: D-2
*Thick: 3/8
*Width: 1-1/2
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 5.7400
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2 x 2-1/2 x 18 - Oversize High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4369439
Manufacturer: Starrett
Mfg #: 69439
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: D-2
*Thick: 1/2
*Width: 2-1/2
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 6.3700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/8 x 1-1/4 x 18 - Oversize Air Hardening Flat Stock
Item #: LY4657637
Manufacturer: Starrett
Mfg #: 57637
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 7/8
*Width: 1-1/4
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 5.5800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1/2 x 3-1/2 - Oil Hardening Flat Stock
Item #: LY5103210
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 1/2
*Width: 3-1/2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 18.0500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It