We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0

MSC Up To 2022 Part 4 - (149650 Products)


Browning - 2" Cast Iron Drive Tightener - Single Adjusting


Item #: 08976763
Brand: Browning
Model #: SATP
Exact Tooling IR#: 04

Product Specifications
Type. Single Adjusting Drive Tightener
Style Single Adjusting
Material Cast Iron
Width (Inch) 2
Width (Decimal Inch) 2.0000

$261.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Browning - 2" Cast Iron Drive Tightener - Single Adjusting


Item #: 08976771
Brand: Browning
Model #: SATQ
Exact Tooling IR#: 04

Product Specifications
Type. Single Adjusting Drive Tightener
Style Single Adjusting
Material Cast Iron
Width (Inch) 2
Width (Decimal Inch) 2.0000

$111.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Mead - 1/2" Stroke x 1-1/8" Bore Double Acting Air Cylinder - 10-32 Port, -40 to 250°F


Item #: 35446442
Brand: Mead
Model #: SS-112X0.50-FB
Exact Tooling IR#: 04

Product Specifications
Type Double Acting
Bore Size (Inch) 1-1/8
Rod Diameter (Inch) 1/2
Rod Diameter (Decimal Inch) 0.500
Stroke Length (Inch) 1/2
Port Size 10-32
Port Type UNF
Length (Inch) 25/32

$329.65

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Motors - 1/2 hp, TEAO Enclosure, Auto Thermal Protection, 1,075 RPM, 208-230 Volt, 60 Hz, Single Phase Permanent Split Capacitor (PSC) Motor - Size 48Y Frame, Stud/Band Mount, 1 Speed, Sleeve Bearings, 3.0 Full Load Amps, B Class Insulation, Reversible


Item #: 04176830
Brand: US Motors
Model #: 1862
Exact Tooling IR#: 04

Product Specifications
Motor Type Single Phase Permanent Split Capacitor (PSC)
Type of Enclosure TEAO
Horsepower 1/2
Thermal Protection Rating Auto
Name Plate RPMs 1075
Voltage 208-230
Frequency Hz 60
Frame Size 48Y
Mount Type Stud/Band
Number of Speeds 1
Bearing Type Sleeve
Applications HVAC
Full Load Amperage 3.0
Insulation Class B
Overall Length (Decimal Inch) 11.9000
Shaft Diameter x Length (Inch) 1/2 x 5
Full Load Efficiency Rating 72.80
Motor Run Capacitor Micro Farid 10
Motor Run Capacitor Volts 370
Service Factor Rating 1.00
Motor Rotation Reversible
PSC Code 6105

$133.21

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

ARO/Ingersoll-Rand - 1/2" Male NPT x 1/2" Female NPT Right Angle Flow Control Valve - 0 to 150 psi & Brass Material


Item #: 87111126
Brand: ARO/Ingersoll-Rand
Model #: 119308-500
Exact Tooling IR#: 04

Product Specifications
Valve Type Right Angle
Male Thread Size 1/2
Female Thread Size 1/2
Tube Outside Diameter (Inch) 1/2
Maximum Working Pressure (psi) 150.00
Material Brass
Thread Type NPT

$91.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

U.S. Tsubaki - 19 Teeth, 1/2" Chain Pitch, Chain Size 40, Sprocket - 3.296" Outside Diam


Item #: 04457495
Brand: U.S. Tsubaki
Model #: D40BTL19
Exact Tooling IR#: 04

Product Specifications
Number of Teeth 19
Chain Pitch (Inch) 0.500
Chain Size Number 40
Maximum Bore Diameter (Inch) 1-1/4
Outside Diameter (Decimal Inch) 3.2960
PSC Code 3020

$145.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Parker - 3" Stroke x 1-1/4" Bore Double Acting Air Cylinder - 1/8 Port, 7/16-20 Rod Thread, 250 Max psi, 14 to 140°F


Item #: 85495620
Brand: Parker
Model #: 1.25DXPSRM03.00
Exact Tooling IR#: 04

Product Specifications
Type Double Acting
Bore Size (Inch) 1-1/4
Bore Size (Decimal Inch) 1.25
Rod Diameter (Decimal Inch) 0.437
Stroke Length (Inch) 3
Mounting Style Double End or Rear Pivot Mount
Port Size 1/8
Port Type NPTF
Length (Decimal Inch) 8.910
Material Stainless Steel
Seal Material Buna-N
Maximum Working Pressure (psi) 250
Rod Thread Size 7/16-20
Style Male

$95.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 4-7/16" OAL2-Bolt Flange - Stainless Steel


Item #: 35378454
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Type 2-Bolt Flange
Width (Inch) 15/16
Overall Length (Inch) 4-7/16
Material Stainless Steel

$126.29

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Thomson Industries - 3/4" Inside Diam, 470/940 Lbs. Dynamic Capacity, Open Single Pillow Block Linear Bearing - 1.56" Overall Height x 2-3/4" Overall Width


Item #: 35528702
Brand: Thomson Industries
Model #: SPB12OPN
Exact Tooling IR#: 04

Product Specifications
Type Open Single Pillow Block
Inside Diameter (Decimal Inch) 0.7500
Dynamic Load Capacity (Lb.) 470/940
Overall Height (Decimal Inch) 1.5600
Overall Width (Decimal Inch) 2.7500

$202.43

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Tritan - 26 Teeth, 3/4" Chain Pitch, Chain Size 60, QD Sprocket - 6.222" Pitch Diam, 6.614" Outside Diam


Item #: 37629912
Brand: Tritan
Model #: 60SK26H
Exact Tooling IR#: 04

Product Specifications
Type QD Sprocket
Number of Teeth 26
Chain Pitch (Inch) 0.750
Chain Size Number 60
Outside Diameter (Decimal Inch) 6.6140
Pitch Diameter (Decimal Inch) 6.2220
PSC Code 3020

$156.90

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

U.S. Tsubaki - 42 Teeth, 1/2" Chain Pitch, Chain Size 40, Taper Lock Sprocket - 6.97" Outside Diam


Item #: 04457347
Brand: U.S. Tsubaki
Model #: 40BTL42
Exact Tooling IR#: 04

Product Specifications
Type Taper Lock Sprocket
Number of Teeth 42
Chain Pitch (Inch) 0.500
Chain Size Number 40
Maximum Bore Diameter (Inch) 1-11/16
Bushing Number 1610
Outside Diameter (Decimal Inch) 6.9700
PSC Code 3020

$133.83

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Brand: Titan USA / Part #: TT82969TIN


Item #: 87750899
Brand: Titan USA
Model #: TT82969TIN

Product Specifications

Thread Size (Inch) 3/4-10
Thread Limit H3
Class Of Fit 2B/3B
Number Of Flutes 4
Chamfer Plug
Material High Speed Steel
Coating/Finish TiN
Threads per Inch 10
Thread Direction Right Hand
Coolant Through No
Thread Standard UNC
Overall Length (Inch) 4-1/4
Thread Pitch (Decimal Inch) 0.1000
Overall Length (Decimal Inch) 4.2500
Thread Length (Decimal Inch) 2.0000
Thread Length (Inch) 2
Shank Diameter (Decimal Inch) 0.5900
Square Length (Inch) 11/16
Square Size (Decimal Inch) 0.4420
Series General Purpose Taps - High Speed Steel - Hand Taps - Left Hand

$0.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Keo - 5/16" Radius, 1-1/8" Mill Diam, 4 Flute High Speed Steel Corner Rounding End Mill - Single End, TiN Finish, 3/8" Tip Diam, 3-1/4" OAL, 1/2" Shank Diam


Item #: 33018599
Brand: Keo
Model #: 14281
Exact Tooling IR#: 04

Features and Benefits

High Speed Steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Material High Speed Steel
Single or Double End Single
Radius (Inch) 5/16
Radius (Decimal Inch) 0.3125
Mill Diameter (Inch) 1-1/8
Mill Diameter (Decimal Inch) 1.1250
Number of Flutes 4
Finish/Coating TiN
Shank Diameter (Inch) 1/2
Tip Diameter (Inch) 3/8
Tip Diameter (Decimal Inch) 0.3750
Overall Length (Inch) 3-1/4
Cutting Direction Right Hand
Helix Angle 0
Radius Tolerance (Decimal Inch) +0.001/-0.001
Mill Diameter Tolerance (Decimal Inch) +0.002/-0.000

$131.42

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hertel - 3/8" Radius, 1-1/4" Mill Diam, 4 Flute Cobalt Corner Rounding End Mill - Single End, TiN Finish, 3-1/2" OAL, 1/2" Shank Diam


Item #: 79563045
Brand: Hertel
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Material Cobalt
Single or Double End Single
Radius (Inch) 3/8
Radius (Decimal Inch) 0.3750
Mill Diameter (Inch) 1-1/4
Mill Diameter (Decimal Inch) 1.1250
Number of Flutes 4
Finish/Coating TiN
Shank Diameter (Inch) 1/2
Overall Length (Inch) 3-1/2
Material Grade M42

$198.10

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hertel - 3/8" Radius, 1-1/4" Mill Diam, 4 Flute Cobalt Corner Rounding End Mill - Single End, TiN Finish, 3-3/4" OAL, 7/8" Shank Diam


Item #: 79563037
Brand: Hertel
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Material Cobalt
Single or Double End Single
Radius (Inch) 3/8
Radius (Decimal Inch) 0.3750
Mill Diameter (Inch) 1-1/4
Mill Diameter (Decimal Inch) 1.2500
Number of Flutes 4
Finish/Coating TiN
Shank Diameter (Inch) 7/8
Overall Length (Inch) 3-3/4
Material Grade M42

$203.74

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Magafor - Corner Rounding End Mills Material: Solid Carbide Single or Double End: Single


Item #: 41331935
Brand: Magafor
Model #: 88855000150
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.

Product Specifications

Corner Rounding End Mills; Material: Solid Carbide ; Single or Double End: Single ; Radius (mm): 0.15 ; Radius (Decimal Inch): 0.0059 ; Mill Diameter (Decimal Inch): 0.0350 ; Mill Diameter (mm): 1
Material Solid Carbide
Single or Double End Single
Radius (mm) 0.15
Radius (Decimal Inch) 0.0059
Mill Diameter (Decimal Inch) 0.0350
Mill Diameter (mm) 1
Number of Flutes 2
Finish/Coating AlTiN
Shank Diameter (mm) 3.00
Tip Diameter (mm) 0.50
Tip Diameter (Decimal Inch) 0.0200
Overall Length (mm) 50.00
Material Grade K15
Helix Angle 12
Radius Tolerance (Decimal Inch) ±0.0008
Mill Diameter Tolerance (Decimal Inch) ±0.00039
Series/List 8550

$69.09

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Keo - 5/16" Radius, 1-1/8" Mill Diam, 4 Flute High Speed Steel Corner Rounding End Mill - Single End, TiN Finish, 3/8" Tip Diam, 3-1/2" OAL, 7/8" Shank Diam


Item #: 33018615
Brand: Keo
Model #: 14291
Exact Tooling IR#: 04

Features and Benefits

High Speed Steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Material High Speed Steel
Single or Double End Single
Radius (Inch) 5/16
Radius (Decimal Inch) 0.3125
Mill Diameter (Inch) 1-1/8
Mill Diameter (Decimal Inch) 1.1250
Number of Flutes 4
Finish/Coating TiN
Shank Diameter (Inch) 7/8
Tip Diameter (Inch) 3/8
Tip Diameter (Decimal Inch) 0.3750
Overall Length (Inch) 3-1/2
Cutting Direction Right Hand
Helix Angle 0
Radius Tolerance (Decimal Inch) +0.001/-0.001
Mill Diameter Tolerance (Decimal Inch) +0.002/-0.000

$131.42

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Onsrud - 5/16" Cutting Diam x 3/4" Length of Cut, 1 Flute, Downcut Spiral Router Bit - Uncoated, Right Hand Cut, Solid Carbide, 3" OAL x 1/2" Shank Diam, Single Edge, 22° Helix Angle


Item #: 76525831
Brand: Onsrud
Model #: 62-630
Exact Tooling IR#: 04

Features and Benefits

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (Inch) 5/16
Cutting Diameter (Decimal Inch) 0.3125
Number of Flutes 1
Flute Type Downcut
Cutting Direction Right Hand
Material Application Aluminum
Material Solid Carbide
Length of Cut (Decimal Inch) 0.7500
Length of Cut (Inch) 3/4
Shank Diameter (Inch) 1/2
Overall Length (Inch) 3
Router Style Single Edge
Finish/Coating Uncoated
Piloted No
Helix Angle 22.00

$139.49

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Onsrud - 5/16" Cutting Diam x 3/4" Length of Cut, 1 Flute, Upcut Spiral Router Bit - Uncoated, Right Hand Cut, Solid Carbide, 3" OAL x 1/2" Shank Diam, Single Edge, 22° Helix Angle


Item #: 76526144
Brand: Onsrud
Model #: 63-630
Exact Tooling IR#: 04

Features and Benefits

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (Inch) 5/16
Cutting Diameter (Decimal Inch) 0.3125
Number of Flutes 1
Flute Type Upcut
Cutting Direction Right Hand
Material Application Aluminum
Material Solid Carbide
Length of Cut (Decimal Inch) 0.7500
Length of Cut (Inch) 3/4
Shank Diameter (Inch) 1/2
Overall Length (Inch) 3
Router Style Single Edge
Finish/Coating Uncoated
Piloted No
Helix Angle 22.00

$139.49

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Onsrud - 1/2" Cutting Diam x 1-1/8" Length of Cut, 4 Flute, Downcut Spiral Router Bit - Uncoated, Right Hand Cut, Solid Carbide, 3-1/2" OAL x 1/2" Shank Diam, Four Edge, 30° Helix Angle


Item #: 73215014
Brand: Onsrud
Model #: 54-365
Exact Tooling IR#: 04

Features and Benefits

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (Inch) 1/2
Cutting Diameter (Decimal Inch) 0.5000
Number of Flutes 4
Flute Type Downcut
Cutting Direction Right Hand
Material Application Fiberglass
Material Solid Carbide
Length of Cut (Decimal Inch) 1.1250
Length of Cut (Inch) 1-1/8
Shank Diameter (Inch) 1/2
Overall Length (Inch) 3-1/2
Router Style Four Edge
Finish/Coating Uncoated
Piloted No
Helix Angle 30.00

$97.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It