Email: sales@makersind.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 2 - (154050 Products)

Value Collection - 9/32" OD Viton O-Ring - 1/16" Thick, Round Cross Section, Durometer 75 - Makers Industrial Supply

Value Collection - 9/32" OD Viton O-Ring - 1/16" Thick, Round Cross Section, Durometer 75


Item #: 11253986
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.
Viton is a highly corrosion-resistant material used against petroleum fluids, diester lubricants, silicone fluids, phosphate esters, solvents and acids except for fuming nitric acids. It is especially good for hard vacuum services and low gas permeability. Not for use with acetates, ketones, methyl alcohol, brake fluids, hot water or steam.
Product Specifications
Cross Section Shape Round
Material Viton
Dash Number 007
System of Measurement Inch
Durometer 75
Durometer (Shore A) 75A
Inside Diameter (Inch) 3/32
Inside Diameter (Decimal Inch) 0.1450
Outside Diameter (Inch) 9/32
Outside Diameter (Decimal Inch) 0.2850
Thickness (Inch) 1/16
Thickness (Decimal Inch) 0.0700
Maximum Temperature (F) 400.000

$203.44

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 0.6732" 120° Spiral Flute Vanadium High Speed Steel Screw Machine Drill Bit - Makers Industrial Supply

OSG - 0.6732" 120° Spiral Flute Vanadium High Speed Steel Screw Machine Drill Bit


Item #: 00131672
Brand: OSG
Model #: 61671

Features and Benefits

Vanadium high speed steel (HSSE) is made of high speed steel, carbon, vanadium carbide and other alloys to increase abrasive wear resistance and toughness. It is commonly used for general applications on stainless steels and high silicon aluminums.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Spiral flutes are constructed of a higher flute angle to remove chips easier.
Product Specifications
Drill Bit Size (Decimal Inch) 0.6732
Drill Point Angle 120
Drill Bit Material Vanadium High Speed Steel
Drill Bit Finish/Coating TiN
Flute Type Spiral
Cutting Direction Right Hand
Shank Type Straight
Flute Length (mm) 62.00
Overall Length (mm) 128.00
Point Type Faceted
Shank Diameter (mm) 20.00
Spiral Type Fast Spiral
Threaded Shank No
Web Configuration Parallel
Web Thinning Web-Thinned
Drill Bit Grade High Performance
Series/List 1100

$192.31

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - 3/4" Box End Torque Wrench Interchangeable Head - Use with CDI Torque Wrenches 350NMIMH, 300T-I - Makers Industrial Supply

CDI - 3/4" Box End Torque Wrench Interchangeable Head - Use with CDI Torque Wrenches 350NMIMH, 300T-I


Item #: 73777534
Brand: CDI
Model #: TCQXX24A
Exact Tooling IR#: 04

Product Specifications
Head Type Box End
Size (Inch) 3/4
For Use With CDI Torque Wrenches 350NMIMH, 300T-I
PSC Code 5120

$251.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - Tethered Tool Lanyard - Skyhook Connection - Makers Industrial Supply

Proto - Tethered Tool Lanyard - Skyhook Connection


Item #: 62862503
Brand: Proto
Model #: JPS2
Exact Tooling IR#: 04

Product Specifications
Type Tethered Tool Lanyard
Connection Type Skyhook
Additional Info (2) SkyHooks (2) SkyDocks and (2) SkyDock Wrist Straps

$145.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - 1-3/8" Open End Torque Wrench Interchangeable Head - Use with CDI Torque Wrenches 200NMIMH, 150MFIMHSS, 250NFIMHSS, 100T-I, 200T-I - Makers Industrial Supply

CDI - 1-3/8" Open End Torque Wrench Interchangeable Head - Use with CDI Torque Wrenches 200NMIMH, 150MFIMHSS, 250NFIMHSS, 100T-I, 200T-I


Item #: 73762627
Brand: CDI
Model #: TCQYO44A
Exact Tooling IR#: 04

Product Specifications
Head Type Open End
Size (Inch) 1-3/8
Maximum Torque (Ft/Lb) 160
For Use With CDI Torque Wrenches 200NMIMH, 150MFIMHSS, 250NFIMHSS, 100T-I, 200T-I
PSC Code 5120

$257.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Indexable Drill Inserts; Insert Style: DFPR; Insert Material: Carbide; Manufacturer Grade: KCPK10; Thickness (mm): 2

Indexable Drill Inserts; Insert Style: DFPR; Insert Material: Carbide; Manufacturer Grade: KCPK10; Thickness (mm): 2


Item #: 02341147
Brand: Kennametal
Model #: 7034334

Product Specifications

Insert Style DFPR
Insert Material Carbide
Manufacturer Grade KCPK10
Thickness (mm) 2
Inscribed Circle (Decimal Inch) 0.1810
Inscribed Circle (mm) 4.60
Corner Radius (Decimal Inch) 0.0160
Corner Radius (mm) 0.4
Chipbreaker PK
Series Drill Fix
Shape Proprietary
Relief Angle 11
Ansi Code DFPR040204PKO
Iso Code DFPR040204PKO
Compatible Drill Style DFPR
Insert Size 04
Width (mm - 2 Decimals) 4.6
Length (Mm) 4.60
Width (Decimal Inch - 4 Decimals) 0.016
Length (Decimal Inch - 4 Decimals) 0.016
Included Angle Degree 11
Coating/Finish MT-TiCN
Insert Size Code 04
UNSPSC Code 23242105

$20.83

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

PRO-SOURCE - Fans Type: 1 Phase/115V Blade Size: 12 (Inch) - Makers Industrial Supply

PRO-SOURCE - Fans Type: 1 Phase/115V Blade Size: 12 (Inch)


Item #: 38789392
Brand: PRO-SOURCE
Exact Tooling IR#: 04

Product Specifications

Fans; Type: 1 Phase/115V ; Blade Size: 12 (Inch); Maximum Cubic Feet Per Minute: 2,750 ; Number of Speeds: 3 ; Amperage Rating: 1.1 ; CFM Rating At Low Speed: 1600
Type 1 Phase/115V
Blade Size (Inch) 12
Maximum Cubic Feet Per Minute 2750
Number of Speeds 3
Amperage Rating 1.1
CFM Rating At Low Speed 1600
CFM Rating at High Speed 2750
Horsepower 1/12
CFM 2750
Phase Single Phase

$103.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 115 Volts, AC, 600 CFM, Round Tube Axial Fan Kit - 0.22/0.24 Amp Rating, 254mm High x 254mm Wide x 89mm Deep, Includes Fan, Fan Guard, Fan Cord - Makers Industrial Supply

Made in USA - 115 Volts, AC, 600 CFM, Round Tube Axial Fan Kit - 0.22/0.24 Amp Rating, 254mm High x 254mm Wide x 89mm Deep, Includes Fan, Fan Guard, Fan Cord


Item #: 44905990
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.
Product Specifications
Shape Round
Voltage 115
Cubic Feet per Minute 600.00
Diameter (mm) 254.0000
Diameter (Decimal Inch) 10.0000
Height (mm) 254.0000
Width (mm) 254.00
Depth (mm) 89.000
Type of Power AC
Amperage Rating 0.22/0.24
Kit Includes Fan, Fan Guard, Fan Cord

$88.90

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Milton - Valve Extension - For Trucks, Buses - Makers Industrial Supply

Milton - Valve Extension - For Trucks, Buses


Item #: 39027057
Brand: Milton
Model #: 440-3
Exact Tooling IR#: 04

Product Specifications
Type Valve Extension
For Tire Size All Tire Sizes
For Use With Trucks; Buses
Length (Inch) 3-11/16
Material Brass

$118.05

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hi-Tech Duravent - 2" ID x 2-3/4" OD x 11' Long Garage Exhaust Hose - Custom EPDM, Black, -40 to 600°F - Makers Industrial Supply

Hi-Tech Duravent - 2" ID x 2-3/4" OD x 11' Long Garage Exhaust Hose - Custom EPDM, Black, -40 to 600°F


Item #: 01578046
Brand: Hi-Tech Duravent
Model #: 065002000001
Exact Tooling IR#: 04

Product Specifications
Inside Diameter (Inch) 2
Length (Feet) 11
Material Custom EPDM
Color Black

$223.26

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - 9.6mm 140° Spiral Flute Solid Carbide Screw Machine Drill Bit - Makers Industrial Supply

DORMER - 9.6mm 140° Spiral Flute Solid Carbide Screw Machine Drill Bit


Item #: 16950792
Brand: DORMER
Model #: 7625190

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Spiral flutes are constructed of a higher flute angle to remove chips easier.
Product Specifications
Drill Bit Size (Decimal Inch) 0.3780
Drill Bit Size (mm) 9.60
Drill Point Angle 140
Drill Bit Material Solid Carbide
Drill Bit Finish/Coating TiAlN
Flute Type Spiral
Cutting Direction Right Hand
Shank Type Straight
Coolant Through Yes
Flute Length (mm) 47.00
Overall Length (mm) 89.00
Flute Length x Diameter Ratio 3xD
Shank Diameter (mm) 10.00
Spiral Type Regular Spiral
Shank Length (mm) 40.00
Number of Flutes 2
Web Configuration Parallel
Web Thinning Web-Thinning
Through Coolant Yes

$149.49

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 0.6969" 120° Spiral Flute Vanadium High Speed Steel Screw Machine Drill Bit - Makers Industrial Supply

OSG - 0.6969" 120° Spiral Flute Vanadium High Speed Steel Screw Machine Drill Bit


Item #: 00131706
Brand: OSG
Model #: 61677

Features and Benefits

Vanadium high speed steel (HSSE) is made of high speed steel, carbon, vanadium carbide and other alloys to increase abrasive wear resistance and toughness. It is commonly used for general applications on stainless steels and high silicon aluminums.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Spiral flutes are constructed of a higher flute angle to remove chips easier.
Product Specifications
Drill Bit Size (Decimal Inch) 0.6969
Drill Point Angle 120
Drill Bit Material Vanadium High Speed Steel
Drill Bit Finish/Coating TiN
Flute Type Spiral
Cutting Direction Right Hand
Shank Type Straight
Flute Length (mm) 60.00
Overall Length (mm) 128.00
Point Type Faceted
Shank Diameter (mm) 20.00
Spiral Type Fast Spiral
Threaded Shank No
Web Configuration Parallel
Web Thinning Web-Thinned
Drill Bit Grade High Performance
Series/List 1100

$192.31

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Seco - 9.9mm 140° Spiral Flute Solid Carbide Screw Machine Drill Bit - Makers Industrial Supply

Seco - 9.9mm 140° Spiral Flute Solid Carbide Screw Machine Drill Bit


Item #: 59341438
Brand: Seco
Model #: 02515293

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Multilayer Titanium Aluminum Nitride (TiAlN) is a blended coating that is more efficient than TIN. It offers a high level of wear resistance at higher cutting speeds and used on high alloy steels and cast iron.
Spiral flutes are constructed of a higher flute angle to remove chips easier.
Spiral flute reamers are used in blind and through-hole operations. They are used to bridge interrupted cuts.
Product Specifications
Drill Bit Size (Decimal Inch) 0.3898
Drill Bit Size (mm) 9.90
Drill Point Angle 140
Drill Bit Material Solid Carbide
Drill Bit Finish/Coating Multilayer TiAlN
Flute Type Spiral
Cutting Direction Right Hand
Shank Type Straight
Coolant Through Yes
Flute Length (mm) 47.00
Flute Length (Decimal Inch) 1.8504
Overall Length (mm) 89.00
Overall Length (Decimal Inch) 3.5039
Flute Length x Diameter Ratio 3xD
Shank Diameter (mm) 10.00
Shank Diameter (Decimal Inch) 0.3937
Flute Type Spiral
Specification Designation DIN
Maximum Drilling Depth (mm) 31.00
Maximum Drilling Depth (Decimal Inch) 1.2205
Spiral Type Regular Spiral
Shank Length (mm) 40.00
Shank Length (Decimal Inch) 1.5748
Threaded Shank No
Number of Flutes 2
Web Configuration Tapered
Drill Bit Diameter Tolerance (mm) +0.006 to +0.021
Drill Bit Diameter Tolerance (mm) +0.006 to +0.021
Specification Number DIN 6537A
Specification Number DIN 6537A
Web Thinning Web-Thinned
Series/List SD203A

$217.80

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - 8.7mm 140° Spiral Flute Solid Carbide Screw Machine Drill Bit - Makers Industrial Supply

DORMER - 8.7mm 140° Spiral Flute Solid Carbide Screw Machine Drill Bit


Item #: 16950891
Brand: DORMER
Model #: 7625178

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Spiral flutes are constructed of a higher flute angle to remove chips easier.
Product Specifications
Drill Bit Size (Decimal Inch) 0.3425
Drill Bit Size (mm) 8.70
Drill Point Angle 140
Drill Bit Material Solid Carbide
Drill Bit Finish/Coating TiAlN
Flute Type Spiral
Cutting Direction Right Hand
Shank Type Straight
Coolant Through Yes
Flute Length (mm) 47.00
Overall Length (mm) 89.00
Flute Length x Diameter Ratio 3xD
Shank Diameter (mm) 10.00
Spiral Type Regular Spiral
Shank Length (mm) 40.00
Number of Flutes 2
Web Configuration Parallel
Web Thinning Web-Thinning
Through Coolant Yes

$149.49

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Nano Pro MT - 11 oz Aerosol Can Automotive Multi-Use Dry Lubricant - Isopropyl Alcohol - Makers Industrial Supply

Nano Pro MT - 11 oz Aerosol Can Automotive Multi-Use Dry Lubricant - Isopropyl Alcohol


Item #: 46571113
Brand: Nano Pro MT
Model #: NDT11D
Exact Tooling IR#: 04

Product Specifications
Type Multi-Use Dry Lubricant
Container Size 11 oz.
Composition Isopropyl Alcohol
Container Type Aerosol Can

$270.35

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Associated Spring Raymond - 3.6221" ID, Grade 1075 High Carbon Steel, Oil Finish, Belleville Disc Spring - 7.0866" OD, 0.5512" High, 0.3701" Thick - Makers Industrial Supply

Associated Spring Raymond - 3.6221" ID, Grade 1075 High Carbon Steel, Oil Finish, Belleville Disc Spring - 7.0866" OD, 0.5512" High, 0.3701" Thick


Item #: 61416293
Brand: Associated Spring Raymond
Model #: BD1809400920
Exact Tooling IR#: 04

Features and Benefits

Belleville disc springs, also known as conical washers, have a curved shape that creates a spring-like action. They are used in applications that require heavy loads.
Product Specifications
Type Belleville Disc Spring
System of Measurement Metric
Inside Diameter (Decimal Inch) 3.6221
Inside Diameter (mm) 92.00
Material High Carbon Steel
Material Grade 1075
Outside Diameter (Decimal Inch) 7.0866
Outside Diameter (mm) 180.00
Thickness (mm) 9.40
Thickness (Decimal Inch) 0.3701
Overall Height (mm) 14.00
Overall Height (Decimal Inch) 0.5512
Deflection (Decimal Inch) 0.1181
Deflection (mm) 3.00
Load at Deflection (Lb.) 28179.60
Load at Deflection (N) 125349.00
Finish/Coating Oil
Fastener Standard DIN 2093

$257.25

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Precision Brand - 100 Piece, #0 to #6" Pin Diam, Taper Pin Assortment - 3/4 to 3" Long, 1215 & 12L14 Steel - Makers Industrial Supply

Precision Brand - 100 Piece, #0 to #6" Pin Diam, Taper Pin Assortment - 3/4 to 3" Long, 1215 & 12L14 Steel


Item #: 84408368
Brand: Precision Brand
Model #: 12907
Exact Tooling IR#: 04

Product Specifications
Type Pin Assortment
Fastener Types Included Taper Pins
System of Measurement Inch
Minimum Pin Diameter (Inch) #0
Maximum Pin Diameter (Inch) #6
Minimum Length (Inch) 3/4
Maximum Length (Inch) 3
Material Steel
Number of Pieces 100
Pin Sizes Included 1 (Inch) #0 x 1-1/4; #0 x 1-1/2; #0 x 1-3/4; #0x3/4; #0x1; #1 x 1-1/4; #1 x 1-1/2; #1 x 1-3/4; #1x3/4; #1x1; #1x2; #2 x 1-1/4; #2 x 1-1/2; #2 x 1-3/4; #2 x 2-1/4; #2x3/4; #2x1; #2x2; #3 x 1-1/4; #3 x 1-1/2; #3 x 1-3/4; #3 x 2-1/4; #3 x 2-1/2; #3 x 2-3/4; #3x1
Pin Sizes Included 2 (Inch) #3x2; #3x3; #4 x 1-1/4; #4 x 1-1/2; #4 x 1-3/4; #4 x 2-1/4; #4 x 2-3/4; #4x1; #4x2; #4x3; #5 x 1-1/2; #5 x 1-3/4; #5 x 2-1/4; #5 x 2-1/2; #5 x 2-3/4; #5x2; #5x3; #6 x 1-1/2; #6 x 1-3/4; #6 x 2-1/4; #6 x 2-3/4; #6x2; #6x3
Material Grade 1215; 12L14
Case Material Plastic
Includes 1 (1) #3x3 Taper Pin; (1) #4 x 2-1/4 Taper Pin; (1) #4 x 2-3/4 Taper Pin; (1) #4x2 Taper Pin; (1) #4x3 Taper Pin; (1) #5 x 2-1/2 Taper Pin; (1) #5 x 2-1/4 Taper Pin; (1) #5 x 2-3/4 Taper Pin; (1) #5x3 Taper Pin; (1) #6 x 2-1/4 Taper Pin
Includes 2 (1) #6 x 2-3/4 Taper Pin; (1) #6x3 Taper Pin; (2) #0 x 1-3/4 Taper Pin; (2) #0x1 Taper Pin; (2) #0x3/4 Taper Pin; (2) #1 x 1-3/4 Taper Pin; (2) #1x2 Taper Pin; (2) #1x3/4 Taper Pin; (2) #2 x 1-3/4 Taper Pin; (2) #2 x 2-1/4 Taper Pin; (2) #2x1 Taper Pin
Includes 3 (2) #2x3/4 Taper Pin; (2) #3 x 2-1/2 Taper Pin; (2) #3 x 2-1/4 Taper Pin; (2) #3 x 2-3/4 Taper Pin; (2) #4 x 1-1/4 Taper Pin; (2) #4x1 Taper Pin; (2) #5 x 1-1/2 Taper Pin; (2) #5x2 Taper Pin; (2) #6 x 1-1/2 Taper Pin; (2) #6 x 1-3/4 Taper Pin
Includes 4 (3) #0 x 1-1/2 Taper Pin; (3) #0 x 1-1/4 Taper Pin; (3) #1 x 1-1/2 Taper Pin; (3) #1 x 1-1/4 Taper Pin; (3) #1x1 Taper Pin; (3) #2 x 1-1/2 Taper Pin; (3) #2 x 1-1/4 Taper Pin; (3) #2x2 Taper Pin; (3) #3 x 1-1/2 Taper Pin; (3) #3 x 1-1/4 Taper Pin
Includes 5 (2) #6x2 Taper Pin; (3) #3 x 1-3/4 Taper Pin; (3) #3x1 Taper Pin; (3) #3x2 Taper Pin; (3) #4 x 1-1/2 Taper Pin; (3) #4 x 1-3/4 Taper Pin; (3) #5 x 1-3/4 Taper Pin; Plastic Box

$158.65

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - Size 1, 0.146" Small End Diam, 0.172" Large End Diam, Passivated Stainless Steel Taper Pin - Grade 303, 18-8, 1-1/4" OAL, 1-1/4 Pin Length - Makers Industrial Supply

Value Collection - Size 1, 0.146" Small End Diam, 0.172" Large End Diam, Passivated Stainless Steel Taper Pin - Grade 303, 18-8, 1-1/4" OAL, 1-1/4 Pin Length


Item #: 67700922
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Taper pins create a stop or wedge in machinery and are used when frequent assembly and disassembly are required. One end of the pin is slightly larger in diameter than the other, which results in a uniform taper for simple, effective fastening.
Product Specifications
Type Taper Pin
System of Measurement Inch
Taper Pin Size 1
Pin Length (Inch) 1-1/4
Pin Length (Decimal Inch) 1.2500
Overall Length (Inch) 1-1/4
Small End Diameter (Decimal Inch) 0.1460
Large End Diameter (Decimal Inch) 0.1720
Material Stainless Steel
Material Grade 303; 18-8
Finish/Coating Passivated
Taper Per Foot (Inch) 1/4
Minimum Diameter Tolerance (Decimal Inch) -0.0007
Maximum Diameter Tolerance (Decimal Inch) 0.0013
Fastener Standard ANSI/ASME B18.8.2

$172.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 1/2-20 UNF Stainless Steel Right Hand Hex Nut - 3/4" Across Flats, 7/16" High, Uncoated - Makers Industrial Supply

Value Collection - 1/2-20 UNF Stainless Steel Right Hand Hex Nut - 3/4" Across Flats, 7/16" High, Uncoated


Item #: 60931540
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Hex nuts are the most common type of nut. They have six uniform sides and are used in general-purpose fastening applications.
Stainless steel is a strong, corrosion-resistant alloy with excellent resistance to heat. It is used in high-stress, outdoor and corrosive applications.
Product Specifications
System of Measurement Inch
Type Hex Nut
Material Stainless Steel
Thread Size 1/2-20
Thread Direction Right Hand
Material Grade 316
Finish/Coating Uncoated
Thread Standard UNF
Width Across Flats (Inch) 3/4
Width Across Flats (Decimal Inch) 0.7500
Height (Inch) 7/16
Military Specification Does Not Meet Military Specifications

$172.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Holo-Krome - M42x4.50 Metric Coarse Hex Socket Drive, Socket Cap Screw - Grade 12.9 Alloy Steel, Black Oxide Finish, Partially Threaded, 300mm Length Under Head - Makers Industrial Supply

Holo-Krome - M42x4.50 Metric Coarse Hex Socket Drive, Socket Cap Screw - Grade 12.9 Alloy Steel, Black Oxide Finish, Partially Threaded, 300mm Length Under Head


Item #: 39231550
Brand: Holo-Krome
Model #: 11568476
Exact Tooling IR#: 04

Features and Benefits

Socket cap head types have large cylindrical heads with recessed hex-shaped drives. They are ideal for applications where limited clearance would not allow the use of wrenches and sockets.
Hex socket drive types have a hex-shaped recess in the head and are driven with hex keys or hex socket bits. The driving surface is protected from external damage and provides six sides of contact surface for added torque.
Alloy steel is the strongest of all steel types. It has high tensile strength and offers excellent resistance to wear, fatigue and galling.
Product Specifications
System of Measurement Metric
Head Type Socket Cap
Drive Type Hex Socket
Thread Size (mm) M42x4.50
Length Measurement Type Length Under Head
Length (mm) 300.00
Material Alloy Steel
Finish/Coating Black Oxide
Full or Partial Threading Partially Threaded
Thread Standard Metric Coarse
Fastener Standard ASTM A574
Hex Key Size (mm) 32.00
Material Grade Grade 12.9

$172.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It