#684-4Z Internal Chamfer Gage 0-127 Degree

Item #: MV7063691
Manufacturer: Starrett
Mfg #: 63691

Technical Specifications:
•Angle: 90-127 ID •Brand Name: Starrett •Capacity: 1 - 2 •Model Number: 684-4Z

Description:
•When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator •No setting master is necessary •Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face •Gages are also available with electronic indicators on request •Deluxe padded case •All ground surfaces are of hardened tool steel indicators are AGD design

Shipping Info:
•Actual Weight - 2.3000

$799.44

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

.020 - .170" Capacity - 90° Angle - Countersink Gage

Item #: MX55900
Manufacturer: Barcor
Mfg #: 900

Technical Specifications:
•Angle: 90 •Brand Name: Barcor •Capacity: .020 - .170

Description:
•The Barcor countersink gage is a precision instrument designed specifically to measure the top (major) countersink diameter •Merely press the spring loaded, exact angle gaging plunger into the countersink and read the dial directly in .002" or 0.05mm diameter increments on the dial face •This gage gives you fact, accurate, and repeatable readings on the shop floor or in the gage room •Virtually foolproof, even the inexperienced can use the countersink gage with reliable results

Shipping Info:
•Actual Weight - 2.0000

$428.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#684-2Z Internal Chamfer Gage 0-127 Degree

Item #: MV7063689
Manufacturer: Starrett
Mfg #: 63689

Technical Specifications:
•Angle: 90-127 ID •Brand Name: Starrett •Capacity: 0 - 1/2 •Model Number: 684-2Z

Description:
•When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator •No setting master is necessary •Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face •Gages are also available with electronic indicators on request •Deluxe padded case •All ground surfaces are of hardened tool steel •Indicators are AGD design

Shipping Info:
•Actual Weight - 1.8000

$571.03

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

.360 - .560" Capacity - 100° Angle - Countersink Gage

Item #: MX551002
Manufacturer: Barcor
Mfg #: 1002

Technical Specifications:
•Angle: 100 •Brand Name: Barcor •Capacity: .360 - .560

Description:
•The Barcor countersink gage is a precision instrument designed specifically to measure the top (major) countersink diameter •Merely press the spring loaded, exact angle gaging plunger into the countersink and read the dial directly in .002" or 0.05mm diameter increments on the dial face •This gage gives you fact, accurate, and repeatable readings on the shop floor or in the gage room •Virtually foolproof, even the inexperienced can use the countersink gage with reliable results

Shipping Info:
•Actual Weight - 2.0000

$341.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#685-2Z External Chamfer Gage 0-90 Degree

Item #: MV7063693
Manufacturer: Starrett
Mfg #: 63693

Technical Specifications:
•Angle: 0-90 OD •Brand Name: Starrett •Capacity: 3/16 - 1 •Model Number: 685-2Z

Description:
•When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator •No setting master is necessary •Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face •Gages are also available with electronic indicators on request •Deluxe padded case •All ground surfaces are of hardened tool steel •Indicators are AGD design

Shipping Info:
•Actual Weight - 1.8000

$770.89

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

.020 - .170" Capacity - 100° Angle - Countersink Gage

Item #: MX551000
Manufacturer: Barcor
Mfg #: 1000

Technical Specifications:
•Angle: 100 •Brand Name: Barcor •Capacity: .020 - .170

Description:
•The Barcor countersink gage is a precision instrument designed specifically to measure the top (major) countersink diameter •Merely press the spring loaded, exact angle gaging plunger into the countersink and read the dial directly in .002" or 0.05mm diameter increments on the dial face •This gage gives you fact, accurate, and repeatable readings on the shop floor or in the gage room •Virtually foolproof, even the inexperienced can use the countersink gage with reliable results

Shipping Info:
•Actual Weight - 2.0000

$428.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#687-3Z Countersink Gage 82 Degree .360"-.560"

Item #: MV7063700
Manufacturer: Starrett
Mfg #: 63700

Technical Specifications:
•Angle: 82 •Brand Name: Starrett •Capacity: .360 - .560 •Model Number: 687-3Z

Description:
•Ground surfaces are of hardened tool steel •Indicators AGD design •82° Angle •Directly reads the large diameter of the countersink •Includes set master ring

Shipping Info:
•Actual Weight - 1.6000

$644.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

.160 - .360" Capacity - 120° Angle - Countersink Gage

Item #: MX551201
Manufacturer: Barcor
Mfg #: 1201

Technical Specifications:
•Angle: 120 •Brand Name: Barcor •Capacity: .160 - .360

Description:
•The Barcor countersink gage is a precision instrument designed specifically to measure the top (major) countersink diameter •Merely press the spring loaded, exact angle gaging plunger into the countersink and read the dial directly in .002" or 0.05mm diameter increments on the dial face •This gage gives you fact, accurate, and repeatable readings on the shop floor or in the gage room •Virtually foolproof, even the inexperienced can use the countersink gage with reliable results

Shipping Info:
•Actual Weight - 2.0000

$438.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

0 - 1/2" Capacity - 90° Angle - Mechanical Chamfer Gage

Item #: MX555090
Manufacturer: Barcor
Mfg #: 5090

Technical Specifications:
•Angle: 90 ID •Brand Name: Barcor •Capacity: 0 - 1/2

Description:
•The BARCOR CHAMFER GAGE is a precision instrument designed specifically to measure the top (major) diameter of a chamfer, countersink, center drill, or tapered hole. •The CHAMFER GAGE is a direct reading gage •No Setting Master (Standard) or look-up chart is required.

Shipping Info:
•Actual Weight - 2.0000

$300.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#683-1Z Internal Chamfer Gage 0-90 Degree

Item #: MV7063684
Manufacturer: Starrett
Mfg #: 63684

Technical Specifications:
•Angle: 0-90 ID •Brand Name: Starrett •Capacity: 0 - 3/8 •Model Number: 683-1Z

Description:
•When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator •No setting master is necessary •Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face •Gages are also available with electronic indicators on request •Deluxe padded case •All ground surfaces are of hardened tool steel indicators are AGD design

Shipping Info:
•Actual Weight - 1.6000

$614.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

0 - 1" Capacity - 90° Angle - Electronic Chamfer Gage

Item #: MX551090EL
Manufacturer: Barcor
Mfg #: 1090-SPC

Technical Specifications:
•Angle: 90 ID •Brand Name: Barcor •Capacity: 0 - 1

Description:
•Like BARCOR s well-known mechanical counterpart, the Electronic CHAMFER GAGE requires no Setting Master (Standard) or look up chart •To "Zero" or "Set" the gage, just press the base against any flat ground surface and rotate the bezel to the "Set To" number stamped on the back •Equipped with rechargeable long life batteries, the gage may also be powered continuously through its 110 VAC adapter/battery charger or directly from a printer, PC, data collector, etc.

Shipping Info:
•Actual Weight - 2.0000

$759.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

0 - 3/8" Capacity - 127° Angle - Mechanical Chamfer Gage

Item #: MX550127
Manufacturer: Barcor
Mfg #: 127

Technical Specifications:
•Angle: 127 ID •Brand Name: Barcor •Capacity: 0 - 3/8

Description:
•The BARCOR CHAMFER GAGE is a precision instrument designed specifically to measure the top (major) diameter of a chamfer, countersink, center drill, or tapered hole. Merely press the spring loaded, conically ground, precision 3-blade Gaging Plunger into the chamfer or countersink and instantly read the dial in .001" or .01mm/.02mm diameter increments. •The CHAMFER GAGE is a direct reading gage. No Setting Master (Standard) or look-up chart is required. To "Zero" the gage or check the setting, press the base of the gage against any flat ground surface and adjust the dial to read the "Set To" number stamped on the back. •GUARANTEED ACCURACY: within ± .001" in 0°–90° models / within ± .002" in 90°–127° models

Shipping Info:
•Actual Weight - 2.0000

$367.09

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

.160 - .360" Capacity - 100° Angle - Countersink Gage

Item #: MX551001
Manufacturer: Barcor
Mfg #: 1001

Technical Specifications:
•Angle: 100 •Brand Name: Barcor •Capacity: .160 - .360

Description:
•The Barcor countersink gage is a precision instrument designed specifically to measure the top (major) countersink diameter •Merely press the spring loaded, exact angle gaging plunger into the countersink and read the dial directly in .002" or 0.05mm diameter increments on the dial face •This gage gives you fact, accurate, and repeatable readings on the shop floor or in the gage room •Virtually foolproof, even the inexperienced can use the countersink gage with reliable results

Shipping Info:
•Actual Weight - 2.0000

$331.40

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

0 - 1" Capacity - 127° Angle - Mechanical Chamfer Gage

Item #: MX551127
Manufacturer: Barcor
Mfg #: 1127

Technical Specifications:
•Angle: 127 ID •Brand Name: Barcor •Capacity: 0 - 1

Description:
•The BARCOR CHAMFER GAGE is a precision instrument designed specifically to measure the top (major) diameter of a chamfer, countersink, center drill, or tapered hole. •The CHAMFER GAGE is a direct reading gage •No Setting Master (Standard) or look-up chart is required.

Shipping Info:
•Actual Weight - 1.0500 •Dimensions - Height: 2.00 Length: 7.20 Width: 4.30

$305.91

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#689-2Z Countersink Gage 100 Degree .160"-.360"

Item #: MV7063707
Manufacturer: Starrett
Mfg #: 63707

Technical Specifications:
•Angle: 100 •Brand Name: Starrett •Capacity: .160 - .360 •Model Number: 689-2Z

Description:
•Ground surfaces are of hardened tool steel •Indicators AGD design •100° Angle •Directly reads the large diameter of the countersink •Includes set master ring

Shipping Info:
•Actual Weight - 1.5000 •Dimensions - Height: 2.30 Length: 7.70 Width: 5.50

$606.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#688-2Z Countersink Gage 90 Degree .160"-.360"

Item #: MV7063703
Manufacturer: Starrett
Mfg #: 63703

Technical Specifications:
•Angle: 90 •Brand Name: Starrett •Capacity: .160 - .360 •Model Number: 688-2Z

Description:
•Ground surfaces are of hardened tool steel •Indicators AGD design •90° Angle •Directly reads the large diameter of the countersink

Shipping Info:
•Actual Weight - 1.5000 •Dimensions - Height: 2.30 Length: 7.80 Width: 5.40

$617.94

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#684-3Z Internal Chamfer Gage 0-127 Degree

Item #: MV7063690
Manufacturer: Starrett
Mfg #: 63690

Technical Specifications:
•Angle: 90-127 ID •Brand Name: Starrett •Capacity: 0 - 1 •Model Number: 684-3Z

Description:
•When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator •No setting master is necessary •Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face •Gages are also available with electronic indicators on request •Deluxe padded case •All ground surfaces are of hardened tool steel •Indicators are AGD design

Shipping Info:
•Actual Weight - 1.8000

$563.89

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1 - 2" Capacity - 90° Angle - Mechanical Chamfer Gage

Item #: MX552090
Manufacturer: Barcor
Mfg #: 2090

Technical Specifications:
•Angle: 90 ID •Brand Name: Barcor •Capacity: 1 - 2

Description:
•The BARCOR CHAMFER GAGE is a precision instrument designed specifically to measure the top (major) diameter of a chamfer, countersink, center drill, or tapered hole. •The CHAMFER GAGE is a direct reading gage •No Setting Master (Standard) or look-up chart is required.

Shipping Info:
•Actual Weight - 1.5000 •Dimensions - Height: 4.80 Length: 8.40 Width: 4.30

$407.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

0 - 1" Capacity - 90° Angle - Mechanical Chamfer Gage

Item #: MX551090
Manufacturer: Barcor
Mfg #: 1090

Technical Specifications:
•Angle: 90 ID •Brand Name: Barcor •Capacity: 0 - 1

Description:
•The BARCOR CHAMFER GAGE is a precision instrument designed specifically to measure the top (major) diameter of a chamfer, countersink, center drill, or tapered hole. •The CHAMFER GAGE is a direct reading gage •No Setting Master (Standard) or look-up chart is required.

Shipping Info:
•Actual Weight - 1.0500 •Dimensions - Height: 2.00 Length: 7.20 Width: 4.20

$254.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#683-4Z Internal Chamfer Gage 0-90 Degree

Item #: MV7063687
Manufacturer: Starrett
Mfg #: 63687

Technical Specifications:
•Angle: 0-90 ID •Brand Name: Starrett •Capacity: 1 - 2 •Model Number: 683-4Z

Description:
•When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator •No setting master is necessary •Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face •Gages are also available with electronic indicators on request •Deluxe padded case •All ground surfaces are of hardened tool steel •Indicators are AGD design

Shipping Info:
•Actual Weight - 2.3000

$740.30

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It