Janitorial & Facility Maintenance > Paints Coatings & Surface Preparation (ET04) - (6412 Products)
Square End Mill: 1/2" Dia, 3-1/8" LOC, 2 Flute, Solid Carbide
Item #: 67142786
Brand: Cleveland
Model #: C84021
Product Specifications
| Mill Diameter (mm) | 12.70 |
| Mill Diameter (Decimal Inch) | 0.5000 |
| Mill Diameter (Inch) | 1/2 |
| Number Of Flutes | 2 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 3.1250 |
| Length of Cut (Inch) | 3-1/8 |
| Length of Cut (mm) | 79.38 |
| Shank Diameter (mm) | 12.70 |
| Shank Diameter (Inch) | 1/2 |
| Shank Diameter (Decimal Inch) | 0.5000 |
| Overall Length (mm) | 152.40 |
| Overall Length (Decimal Inch) | 6.0000 |
| Overall Length (Inch) | 6 |
| Single Or Double End | Single |
| Coating/Finish Family | ZrN |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 45 |
| Primary Workpiece Material | Aluminum & Non-Ferrous |
| Primary Workpiece Material Code | N |
| Coating/Finish | ZrN |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Straight |
| Material Grade | Sub Micrograin |
| Length Type | Extra Long |
| Series | CEM-AM2-ZN |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
| Mill Diameter (mm) | 12.70 |
| Mill Diameter (Decimal Inch) | 0.5000 |
| Mill Diameter (Inch) | 1/2 |
| Number Of Flutes | 2 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 3.1250 |
| Length of Cut (Inch) | 3-1/8 |
| Length of Cut (mm) | 79.38 |
| Shank Diameter (mm) | 12.70 |
| Shank Diameter (Inch) | 1/2 |
| Shank Diameter (Decimal Inch) | 0.5000 |
| Overall Length (mm) | 152.40 |
| Overall Length (Decimal Inch) | 6.0000 |
| Overall Length (Inch) | 6 |
| Single Or Double End | Single |
| Coating/Finish Family | ZrN |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 45 |
| Primary Workpiece Material | Aluminum & Non-Ferrous |
| Primary Workpiece Material Code | N |
| Coating/Finish | ZrN |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Straight |
| Material Grade | Sub Micrograin |
| Length Type | Extra Long |
| Series | CEM-AM2-ZN |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
| MSC Part # | 67142786 |
| Mfr Part # | C84021 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$227.23
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 12.00 mm Dia, 49.00 mm LOC, 3.00 mm Radius, 3 Flute, Solid Carbide
Item #: 05226410
Brand: WNT
Model #: 5370912430
Product Specifications
| Mill Diameter (mm) | 12.00 |
| Number Of Flutes | 3 |
| Length of Cut (mm) | 49.0000 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | DLC |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 3.00 |
| Overall Length (mm) | 145.0000 |
| Coolant Through | No |
| Chipbreaker | No |
| End Type | Corner Radius |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (mm) | 12.0000 |
| Neck Diameter (mm) | 11.000 |
| UNSPSC Code | 27112803 |
| Series | 53709 |
$126.59
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 16.00 mm Dia, 65.00 mm LOC, 2 Flute, 0.20 mm Chamfer Width, Solid Carbide
Item #: 05784855
Brand: WNT
Model #: 5295016000
Product Specifications
| Mill Diameter (mm) | 16.00 |
| Number Of Flutes | 2 |
| Length of Cut (mm) | 65.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | DPX72S |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.20 |
| Overall Length (mm) | 150.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Extra Long |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (mm) | 16.00 |
| Neck Diameter (mm) | 15.500 |
| UNSPSC Code | 23241614 |
| Series | 52950 |
$398.21
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 4.00 mm Dia, 11.00 mm LOC, 4 Flute, 0.10 mm Chamfer Width, Solid Carbide
Item #: 04654331
Brand: WNT
Model #: 5407104400
Product Specifications
| Mill Diameter (mm) | 4.00 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 11.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Ti1000 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.10 |
| Overall Length (mm) | 69.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Extra Long |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 6.00 |
| Neck Diameter (mm) | 3.800 |
| UNSPSC Code | 23241614 |
| Series | 54071 |
$39.07
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 0.1406" Dia, 0.4250" LOC, 4 Flute, Solid Carbide
Item #: 05688494
Brand: Harvey Tool
Model #: 802509
Product Specifications
| Mill Diameter (Decimal Inch) | 0.1406 |
| Number Of Flutes | 4 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.4250 |
| Shank Diameter (Inch) | 3/16 |
| Shank Diameter (Decimal Inch) | 0.1875 |
| Overall Length (Decimal Inch) | 2.0000 |
| Overall Length (Inch) | 2 |
| Single Or Double End | Single |
| Coating/Finish Family | Bright/Uncoated |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | Yes |
| Coolant Through | No |
| Helix Angle | 30 |
| Primary Workpiece Material | Aluminum & Non-Ferrous; Stainless Steel; Cast Iron; CFRP Materials; Steel |
| Primary Workpiece Material Code | P; C; K; M; N |
| Coating/Finish | Bright/Uncoated |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Straight |
| Material Grade | Solid Carbide |
| Reach Length (Inch) | 7/8 |
| Reach Length (Decimal Inch) | 0.8750 |
| Series | Miniature End Mills - Square - Long Reach, Standard Flute |
| System Of Measurement | Decimal Inch |
| UNSPSC Code | 27112803 |
$44.85
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 3/4" Dia, 1-5/8" LOC, 5 Flute, Solid Carbide
Item #: 33105586
Brand: Titan USA
Model #: TC61848
Product Specifications
| Mill Diameter (Decimal Inch) | 0.7500 |
| Mill Diameter (Inch) | 3/4 |
| Number Of Flutes | 5 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 1.6250 |
| Length of Cut (Inch) | 1-5/8 |
| Shank Diameter (Inch) | 3/4 |
| Shank Diameter (Decimal Inch) | 0.7500 |
| Overall Length (Decimal Inch) | 4.0000 |
| Overall Length (Inch) | 4 |
| Single Or Double End | Single |
| Coating/Finish Family | Bright/Uncoated |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 45 |
| Primary Workpiece Material | Aluminum & Non-Ferrous; High-Temp Alloy; Stainless Steel; Cast Iron; Steel |
| Primary Workpiece Material Code | P; S; K; M; N |
| Coating/Finish | Bright/Uncoated |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Straight |
| Material Grade | Solid Carbide |
| Series | General Purpose End Mills - Carbide - 5 Flute - Square - 45 deg Helix |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
| Mill Diameter (Decimal Inch) | 0.7500 |
| Mill Diameter (Inch) | 3/4 |
| Number Of Flutes | 5 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 1.6250 |
| Length of Cut (Inch) | 1-5/8 |
| Shank Diameter (Inch) | 3/4 |
| Shank Diameter (Decimal Inch) | 0.7500 |
| Overall Length (Decimal Inch) | 4.0000 |
| Overall Length (Inch) | 4 |
| Single Or Double End | Single |
| Coating/Finish Family | Bright/Uncoated |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 45 |
| Primary Workpiece Material | Aluminum & Non-Ferrous; High-Temp Alloy; Stainless Steel; Cast Iron; Steel |
| Primary Workpiece Material Code | P; S; K; M; N |
| Coating/Finish | Bright/Uncoated |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Straight |
| Material Grade | Solid Carbide |
| Series | General Purpose End Mills - Carbide - 5 Flute - Square - 45 deg Helix |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
| MSC Part # | 33105586 |
| Mfr Part # | TC61848 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$177.80
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 20.00 mm Dia, 42.00 mm LOC, 1.50 mm Radius, 3 Flute, Solid Carbide
Item #: 05185533
Brand: WNT
Model #: 5370920115
Product Specifications
| Mill Diameter (mm) | 20.00 |
| Number Of Flutes | 3 |
| Length of Cut (mm) | 42.0000 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | DLC |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 1.50 |
| Overall Length (mm) | 114.0000 |
| Coolant Through | No |
| Chipbreaker | No |
| End Type | Corner Radius |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (mm) | 20.0000 |
| Neck Diameter (mm) | 19.000 |
| UNSPSC Code | 27112803 |
| Series | 53709 |
$200.53
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 20.00 mm Dia, 42.00 mm LOC, 1.00 mm Radius, 3 Flute, Solid Carbide
Item #: 04658845
Brand: WNT
Model #: 5371320110
Product Specifications
| Mill Diameter (mm) | 20.00 |
| Number Of Flutes | 3 |
| Length of Cut (mm) | 42.0000 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | DLC |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 1.00 |
| Overall Length (mm) | 114.0000 |
| Coolant Through | No |
| Chipbreaker | No |
| End Type | Corner Radius |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (mm) | 20.0000 |
| Neck Diameter (mm) | 19.000 |
| UNSPSC Code | 27112803 |
| Series | 53713 |
$336.65
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 1; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Length of Cut (Inch): 1; Coating/Finish: AlCr
Item #: 60504651
Brand: Emuge
Model #: 3946L.100060
Product Specifications
| Mill Diameter (Fractional Inch) | 1 |
| Flute Type | Spiral |
| Number Of Flutes | 4 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 1 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Corner Radius (Decimal Inch) | 0.0600 |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 1 |
| Shank Type | Straight |
| Length Type | Standard Length |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 35/38 |
| Shank Diameter Tolerance | h5 |
| UNSPSC Code | 27112803 |
| Mill Diameter (Fractional Inch) | 1 |
| Flute Type | Spiral |
| Number Of Flutes | 4 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 1 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Corner Radius (Decimal Inch) | 0.0600 |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 1 |
| Shank Type | Straight |
| Length Type | Standard Length |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 35/38 |
| Shank Diameter Tolerance | h5 |
| UNSPSC Code | 27112803 |
| MSC Part # | 60504651 |
| Mfr Part # | 3946L.100060 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$514.42
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 2.50 mm Dia, 5.50 mm LOC, 3 Flute, 0.05 mm Chamfer Width, Solid Carbide
Item #: 05233770
Brand: WNT
Model #: 5361402600
Product Specifications
| Mill Diameter (mm) | 2.50 |
| Number Of Flutes | 3 |
| Length of Cut (mm) | 5.50 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | PCD |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.05 |
| Overall Length (mm) | 55.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Short |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 6.00 |
| Neck Diameter (mm) | 2.300 |
| UNSPSC Code | 23241614 |
| Series | 53614 |
$32.18
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Tapered End Mill: 10 deg Angle per Side, 3/32" Small Dia, 3/4" LOC, 3 Flute, Tapered End
Item #: 31142292
Brand: Internal Tool
Model #: 69-4020-C
Product Specifications
| Mill Diameter (Decimal Inch) | 0.3750 |
| Length of Cut (Inch) | 3/4 |
| Taper Angle Per Side | 10.00 |
| End Mill Material | Solid Carbide |
| End Shape | Tapered |
| Flute Type | Helical |
| Overall Length (Decimal Inch) | 2.5000 |
| Overall Length (Inch) | 2-1/2 |
| Centercutting | No |
| Shank Diameter (Decimal Inch) | 0.3750 |
| Shank Diameter (Inch) | 3/8 |
| Small End Diameter (Decimal Inch) | 0.0940 |
| Small End Diameter (Inch) | 3/32 |
| Tip Diameter (Decimal Inch) | 0.0940 |
| Large End Diameter (Decimal Inch) | 0.3750 |
| Helix Angle | 15 |
| Primary Workpiece Material | Stainless Steel; Cast Iron; Steel; Super Alloys & Titanium |
| Primary Workpiece Material Code | P; S; K; M |
| Material Grade | Micrograin |
| Flute Direction | Right Hand |
| Series | 69 |
| Coating Classification | PVD |
| Length Of Cut (Decimal Inch - 4 Decimals) | 0.7500 |
| Coolant Through | No |
| Coating/Finish | AlTiN |
| Number Of Flutes | 3 |
| Included Angle Degree | 20 |
| UNSPSC Code | 27112803 |
$87.99
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 1" Dia, 2" LOC, 0.76 mm Radius, 3 Flute, Solid Carbide
Item #: 65091563
Brand: Cleveland
Model #: C80396
Product Specifications
| Mill Diameter (Inch) | 1 |
| Mill Diameter (Decimal Inch) | 1.0000 |
| Mill Diameter (mm) | 25.40 |
| Number Of Flutes | 3 |
| Length of Cut (mm) | 50.80 |
| Length of Cut (Inch) | 2 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Chipbreaker | No |
| Coating/Finish | TiAlN |
| Overall Length (Inch) | 4 |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.0300 |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.76 |
| Overall Length (mm) | 101.60 |
| Coolant Through | No |
| Overall Length (Decimal Inch) | 4.0000 |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 2.0000 |
| Length Type | Regular |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Finishing |
| Shank Diameter (Decimal Inch) | 1.0000 |
| Shank Diameter (Inch) | 1 |
| Shank Diameter (mm) | 25.40 |
| Primary Workpiece Material | Stainless Steel; Steel |
| UNSPSC Code | 27112803 |
| Primary Workpiece Material Code | P; M |
| Secondary Workpiece Material | Hard Material |
| Secondary Workpiece Material Code | H |
| Material Grade | Submicron |
| Series | CEM-EMS-3-TA |
| Mill Diameter (Inch) | 1 |
| Mill Diameter (Decimal Inch) | 1.0000 |
| Mill Diameter (mm) | 25.40 |
| Number Of Flutes | 3 |
| Length of Cut (mm) | 50.80 |
| Length of Cut (Inch) | 2 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Chipbreaker | No |
| Coating/Finish | TiAlN |
| Overall Length (Inch) | 4 |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.0300 |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.76 |
| Overall Length (mm) | 101.60 |
| Coolant Through | No |
| Overall Length (Decimal Inch) | 4.0000 |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 2.0000 |
| Length Type | Regular |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Finishing |
| Shank Diameter (Decimal Inch) | 1.0000 |
| Shank Diameter (Inch) | 1 |
| Shank Diameter (mm) | 25.40 |
| Primary Workpiece Material | Stainless Steel; Steel |
| UNSPSC Code | 27112803 |
| Primary Workpiece Material Code | P; M |
| Secondary Workpiece Material | Hard Material |
| Secondary Workpiece Material Code | H |
| Material Grade | Submicron |
| Series | CEM-EMS-3-TA |
| MSC Part # | 65091563 |
| Mfr Part # | C80396 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$588.13
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 2.00 mm Dia, 5.50 mm LOC, 0.50 mm Radius, 3 Flute, Solid Carbide
Item #: 05137336
Brand: WNT
Model #: 5371002205
Product Specifications
| Mill Diameter (mm) | 2.00 |
| Number Of Flutes | 3 |
| Length of Cut (mm) | 5.5000 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | DLC |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.50 |
| Overall Length (mm) | 55.0000 |
| Coolant Through | No |
| Chipbreaker | No |
| End Type | Corner Radius |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (mm) | 6.0000 |
| Neck Diameter (mm) | 1.800 |
| UNSPSC Code | 27112803 |
| Series | 53710 |
$39.12
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 0.0500" Dia, 0.1500" LOC, 4 Flute, Solid Carbide
Item #: 05686639
Brand: Harvey Tool
Model #: 76450-C4
Product Specifications
| Mill Diameter (Decimal Inch) | 0.0500 |
| Number Of Flutes | 4 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.1500 |
| Shank Diameter (Inch) | 1/8 |
| Shank Diameter (Decimal Inch) | 0.1250 |
| Overall Length (Decimal Inch) | 1.5000 |
| Overall Length (Inch) | 1-1/2 |
| Single Or Double End | Single |
| Coating/Finish Family | PVD Diamond |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | Yes |
| Coolant Through | No |
| Helix Angle | 30 |
| Primary Workpiece Material | Aluminum & Non-Ferrous; Stainless Steel; Cast Iron; CFRP Materials; Steel |
| Primary Workpiece Material Code | P; C; K; M; N |
| Coating/Finish | Amorphous Diamond |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Straight |
| Material Grade | Solid Carbide |
| Reach Length (Inch) | 1/2 |
| Reach Length (Decimal Inch) | 0.5000 |
| Reach Length (mm) | 12.70 |
| Series | Miniature End Mills - Square - Long Reach, Standard Flute |
| System Of Measurement | Decimal Inch |
| UNSPSC Code | 27112803 |
$52.77
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 8.00 mm Dia, 21.00 mm LOC, 3 Flute, 0.20 mm Chamfer Width, Solid Carbide
Item #: 05676705
Brand: WNT
Model #: 5361208200
Product Specifications
| Mill Diameter (mm) | 8.00 |
| Number Of Flutes | 3 |
| Length of Cut (mm) | 21.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Bright/Uncoated |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.20 |
| Overall Length (mm) | 80.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Long |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 8.00 |
| Neck Diameter (mm) | 7.700 |
| UNSPSC Code | 23241614 |
| Series | 53612 |
$40.88
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ball End Mill: 0.50 mm Dia, 0.40 mm LOC, 2 Flute, Solid Carbide
Item #: 86510971
Brand: WNT
Model #: 52356805
Product Specifications
| Mill Diameter (Decimal Inch) | 0.0200 |
| Mill Diameter (mm) | 0.50 |
| Number Of Flutes | 2 |
| End Mill Material | Solid Carbide |
| Length of Cut (mm) | 0.40 |
| Coating/Finish | Ti2000 |
| Extended Reach | No |
| Variable Helix | Yes |
| Variable Index | No |
| Helix Angle | 30 |
| Overall Length (mm) | 45.00 |
| Chipbreaker | No |
| Length Type | Regular |
| Helix Style | Variable |
| Shank Diameter (mm) | 4.00 |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Series | 52356 |
| UNSPSC Code | 27112803 |
| Centercutting | No |
| Single Or Double End | Single |
| Coolant Through | No |
| System Of Measurement | Metric |
| Country of Origin | Germany |
$58.40
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ball End Mill: 16.00 mm Dia, 12.00 mm LOC, 2 Flute, Solid Carbide
Item #: 85570299
Brand: WNT
Model #: 52717160
Product Specifications
| Mill Diameter (Decimal Inch) | 0.6400 |
| Mill Diameter (mm) | 16.00 |
| Number Of Flutes | 2 |
| End Mill Material | Solid Carbide |
| Length of Cut (mm) | 12.00 |
| Coating/Finish | Ti1000 |
| Extended Reach | No |
| Variable Helix | Yes |
| Variable Index | No |
| Helix Angle | 30 |
| Overall Length (mm) | 200.00 |
| Chipbreaker | No |
| Length Type | Regular |
| Helix Style | Variable |
| Shank Diameter (mm) | 16.00 |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Series | 52717 |
| UNSPSC Code | 27112803 |
| Centercutting | No |
| Single Or Double End | Single |
| Coolant Through | No |
| System Of Measurement | Metric |
| Country of Origin | Germany |
$465.10
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ball End Mill: 0.30 mm Dia, 0.24 mm LOC, 2 Flute, Solid Carbide
Item #: 87787792
Brand: Mitsubishi
Model #: 378732
Product Specifications
| Mill Diameter (Decimal Inch) | 0.0118 |
| Mill Diameter (mm) | 0.30 |
| Number Of Flutes | 2 |
| End Mill Material | Solid Carbide |
| Length of Cut (mm) | 0.24 |
| Coating/Finish | AlTiSiN |
| Extended Reach | Yes |
| Variable Helix | No |
| Variable Index | No |
| Helix Angle | 30 |
| Overall Length (Decimal Inch) | 1.9685 |
| Overall Length (mm) | 50.00 |
| Chipbreaker | No |
| Undercutting | No |
| Length Type | Long |
| Material Removal Type | Roughing & Finishing |
| Shank Diameter (Decimal Inch) | 0.1575 |
| Shank Diameter (mm) | 4.00 |
| Neck Diameter (Decimal Inch) | 0.0106 |
| Neck Diameter (mm) | 0.27 |
| Nose Radius (mm) | 0.15 |
| Nose Radius (Decimal Inch) | 0.0059 |
| Neck Length (Decimal Inch) | 0.0787 |
| Neck Length (mm) | 2.00 |
| Shank Diameter Tolerance | h6 |
| Primary Workpiece Material | Steel |
| Primary Workpiece Material Code | P; H |
| Secondary Workpiece Material | Steel |
| Secondary Workpiece Material Code | P |
| Material Grade | Carbide |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Series | VF |
| Flute Type | Spiral |
| UNSPSC Code | 27112803 |
| Centercutting | Yes |
| Coating Classification | PVD |
| Single Or Double End | Single |
| Shank Type | Straight-Cylindrical |
| Pitch | Normal |
| Coolant Through | No |
| Length Of Cut (Decimal Inch - 4 Decimals) | 0.0094 |
| System Of Measurement | Metric |
| Country of Origin | Japan |
$119.52
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ball End Mill: 5/8" Dia, 1-1/4" LOC, 3 Flute, Solid Carbide
Item #: 07129828
Brand: Walter-Prototyp
Model #: 8418292
Product Specifications
| Mill Diameter (Inch) | 5/8 |
| Mill Diameter (Decimal Inch) | 0.6250 |
| Number Of Flutes | 3 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 1-1/4 |
| Coating/Finish | Bright/Uncoated |
| Overall Length (Inch) | 3-1/2 |
| Shank Diameter (Inch) | 5/8 |
| Extended Reach | Yes |
| Variable Helix | No |
| Variable Index | No |
| Helix Angle | 39 |
| Overall Length (Decimal Inch) | 3.5000 |
| Chipbreaker | No |
| Undercutting | No |
| Length Of Cut Range (Decimal Inch) | 1.0000 - 1.5000 |
| Length Type | Extended |
| Helix Style | Medium |
| Material Removal Type | Roughing & Finishing |
| Shank Diameter (Decimal Inch) | 0.6250 |
| Nose Radius (Decimal Inch) | 0.3125 |
| Neck Length (Decimal Inch) | 0.5570 |
| Reach Length (Decimal Inch) | 1.8070 |
| Mill Diameter Tolerance | h7 |
| Shank Diameter Tolerance | h6 |
| Maximum Helix Angle | 39 |
| Minimum Helix Angle | 39 |
| Primary Workpiece Material Code | N |
| Secondary Workpiece Material | Non-Ferrous Metal |
| Secondary Workpiece Material Code | N |
| Material Grade | WJ30UU |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Series | MA467 |
| Flute Type | Spiral |
| UNSPSC Code | 23241614 |
| Centercutting | Yes |
| Coating Classification | Uncoated |
| Single Or Double End | Single |
| Shank Type | Straight-Cylindrical |
| Pitch | Normal |
| Coolant Through | No |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.2500 |
| Manufacturers Catalog Number | MA467.15.9A3DS-WJ30UU |
| System Of Measurement | Fractional Inch |
$188.14
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Helical Solutions / Part #: 33662
Item #: 99035339
Brand: Helical Solutions
Model #: 33662
Product Specifications
| Mill Diameter (Inch) | 3/4 |
| Corner Radius (Decimal Inch) | 0.0300 |
| Coating/Finish | Aplus |
| End Mill Material | Solid Carbide |
| Number Of Flutes | 4 |
| Single Or Double End | Single |
| Overall Length (Inch) | 4 |
| Length of Cut (Inch) | 1-5/8 |
| Cutting Direction | Right Hand |
| Mill Diameter (Decimal Inch) | 0.7500 |
| Flute Direction | Right Hand |
| Overall Length (Decimal Inch) | 4.0000 |
| Chipbreaker | Yes |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.6250 |
| Extended Reach | No |
| Shank Type | Round |
| Centercutting | Yes |
| Variable Index | Yes |
| Variable Helix | No |
| Shank Diameter (Decimal Inch) | 0.7500 |
| Shank Diameter (Inch) | 3/4 |
| Series | End Mills for Steels - 4 Flute - Corner Radius - Chipbreaker Rougher - Variable Pitch |
$0.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It