Indexable Cutting Tools > Indexable Milling (ET04) - (42624 Products)
GN352-100-50-M16-S-55 RUBBER BUMPER
Item #: 06781686
Brand: J.W. Winco
Model #: 352-100-50-M16-S-55
Product Specifications
| Isolator Type | Plate/Stud |
| Insert Material | Zinc-Plated Steel |
| Isolator Material | Natural Rubber |
| Maximum Load Capacity | 14040.00 |
| Top Diameter | 100.00 |
| Bottom Diameter | 100 |
| Thread Size | M16 |
| Overall Width | 100 in |
| Overall Diameter | 100 mm |
| Thread Length (Decimal Inch) | 1.6100 |
| Deflection | 0.4900 |
| Hardness Rating | Shore 55A |
| Mount Type | Threaded Stud |
| Shape | Round |
| Thread Pitch | 2 mm |
| Thread Standard | Metric |
| Height (Decimal Inch) | 50 mm |
| UNSPSC Code | 23153130 |
$56.40
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 10.00 mm Dia, 26.00 mm LOC, 1.50 mm Radius, 3 Flute, Solid Carbide
Item #: 04639548
Brand: WNT
Model #: 5371410215
Product Specifications
| Mill Diameter (mm) | 10.00 |
| Number Of Flutes | 3 |
| Length of Cut (mm) | 26.0000 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | DLC |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 1.50 |
| Overall Length (mm) | 94.0000 |
| Coolant Through | No |
| Chipbreaker | No |
| End Type | Corner Radius |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (mm) | 10.0000 |
| Neck Diameter (mm) | 9.200 |
| UNSPSC Code | 27112803 |
| Series | 53714 |
$103.44
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
End Brush: 1-1/8" Dia, Stainless Steel, Knotted Wire
Item #: 04135745
Brand: Tanis
Model #: 71364
Product Specifications
| Brush Diameter (Decimal Inch) | 1-1/8 |
| Filament/Wire Diameter (Decimal Inch) | 0.0140 |
| Fill Material | Stainless Steel |
| Wire Type | Knotted |
| Trim Length (Inch) | 7/8 |
| Shank Diameter (Inch) | 1/4 |
| Maximum Rpm | 20000.000 |
| Overall Length (Decimal Inch) | 2.5000 |
| Shank Included | Yes |
| Piloted | No |
| Flared | No |
| UNSPSC Code | 31191521 |
$41.01
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Turning Insert: TNMG332MS US735, Carbide
Item #: 04618096
Brand: Mitsubishi
Model #: 107625
Product Specifications
| ANSI Insert Code | TNMG332 |
| ISO Insert Code | TNMG160408 |
| Relief Angle | 0 |
| Insert Style | TNMG |
| Corner Radius (mm) | 0.80 |
| Corner Radius (Inch) | 1/32 |
| Corner Radius (Decimal Inch) | 0.0312 |
| Included Angle | 60 |
| Manufacturer Grade | US735 |
| Coating/Finish | CVD |
| Insert Hand | Neutral |
| Insert Thickness (Inch) | 3/16 |
| Insert Thickness | 4.76 |
| Insert Thickness (Decimal Inch) | 0.1875 |
| Inscribed Circle (Decimal Inch) | 0.3750 |
| Inscribed Circle (Inch) | 3/8 |
| Inscribed Circle (mm) | 9.53 |
| Insert Material | Carbide |
| Insert Shape | T - Triangle |
| Chip Breaker Operation | Medium Machining |
| Grade Characteristics | Stainless Steel (M) - Moderate Wear-Resistance and Toughness |
| Side Clearance | Negative |
| Number Of Cutting Edges | 6 |
| Insert Shape Code | T |
| Clearance Code | N |
| Tolerance Code | M |
| Primary Workpiece Material Code | M |
| Chip Breaker | MS |
| ANSI Size Code | 332 |
| ISO Size Code | 160408 |
| UNSPSC Code | 23242105 |
| Insert Size Code | 3 |
$13.82
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Turning Insert: TNMG332LS MT9015, Carbide
Item #: 04372447
Brand: Mitsubishi
Model #: 802986
Product Specifications
| ANSI Insert Code | TNMG332 |
| ISO Insert Code | TNMG160408 |
| Relief Angle | 0 |
| Insert Style | TNMG |
| Corner Radius (mm) | 0.80 |
| Corner Radius (Inch) | 1/32 |
| Corner Radius (Decimal Inch) | 0.0312 |
| Included Angle | 60 |
| Manufacturer Grade | MT9015 |
| Coating/Finish | Bright/Uncoated |
| Insert Hand | Neutral |
| Insert Thickness (Inch) | 3/16 |
| Insert Thickness | 4.76 |
| Insert Thickness (Decimal Inch) | 0.1875 |
| Inscribed Circle (Decimal Inch) | 0.3750 |
| Inscribed Circle (Inch) | 3/8 |
| Inscribed Circle (mm) | 9.53 |
| Insert Material | Carbide |
| Insert Shape | T - Triangle |
| Chip Breaker Operation | Light Machining; Finishing |
| Grade Characteristics | Special, Super Alloys (S) - High Wear-Resistance to Moderate Wear-Resistance and Toughness |
| Side Clearance | Negative |
| Number Of Cutting Edges | 6 |
| Insert Shape Code | T |
| Clearance Code | N |
| Tolerance Code | M |
| Primary Workpiece Material Code | S |
| Chip Breaker | LS |
| ANSI Size Code | 332 |
| ISO Size Code | 160408 |
| UNSPSC Code | 23242105 |
| Insert Size Code | 3 |
$9.28
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #0; Inner Diameter (Decimal Inch): 0.1676; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
Item #: 03871688
Brand: GSG
Model #: GSG-CR-0.1676C
Product Specifications
| Material | Solid Carbide |
| Tolerance (Decimal Inch) | 0.00000/-0.00002 |
| Blank Number Wire Size | #0 |
| Inner Diameter (Decimal Inch) | 0.1676 |
| Calibrated | Yes |
| Traceability Certification Included | NIST |
| Go/No Go | Go |
| Standards | B47.1 Gage Standards; ASME B89.1.6 |
| UNSPSC Code | 41111619 |
$726.13
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Ingersoll Cutting Tools / Part #: 2923689
Item #: 96669007
Brand: Ingersoll Cutting Tools
Model #: 2923689
Product Specifications
| Minimum Cutting Diameter (Decimal Inch) | 3.0000 |
| Minimum Cutting Diameter (Inch) | 3 |
| Minimum Cutting Diameter (mm) | 76.20 |
| Maximum Cutting Diameter (Inch) | 3 |
| Maximum Cutting Diameter (Decimal Inch) | 3.0000 |
| Maximum Depth of Cut (Decimal Inch) | 3.3480 |
| Arbor Hole Diameter (Decimal Inch) | 1.2500 |
| Compatible Insert Size Code | 324 |
| Cutter Style | 2XJ3J |
| Cutting Direction | Right Hand |
| Insert Holding Method | Screw |
| Lead Angle | 90 deg |
| Rake | Negative |
| Series | 2XJ3J |
| Maximum Body Diameter (mm) | 73.15 |
| Maximum Body Diameter (Decimal Inch) | 2.8800 |
| Overall Height (Inch) | 4-1/4 |
| Overall Height (Decimal Inch) | 4.2500 |
| Keyway Width (Inch) | 1/2 |
| Keyway Width (Decimal Inch) | 0.5000 |
| Pitch Type | Close |
| Tool Application | Facing; Shouldering |
| Tool Performance | General Purpose |
| Primary Workpiece Material | Universal |
| Primary Workpiece Material Code | O |
| Cutting Edge Length (Decimal Inch) | 3.3480 |
| Complete Insert Compatibility | IPM324? |
| Toolholder Material | Steel |
| Manufacturers Catalog Number | 2XJ3J-30042D4R01 |
| Coolant Through | Yes |
| Number Of Cutter Inserts | 35 |
| Number Of Flutes | 5 |
$2,534.40
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 18.50 mm Dia, 52.00 mm LOC, 2 Flute, 0.10 mm Chamfer Width, Solid Carbide
Item #: 04753018
Brand: WNT
Model #: 5363218800
Product Specifications
| Mill Diameter (mm) | 18.50 |
| Number Of Flutes | 2 |
| Length of Cut (mm) | 52.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | PCD |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.10 |
| Overall Length (mm) | 154.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Medium |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 20.00 |
| Neck Diameter (mm) | 18.000 |
| UNSPSC Code | 23241614 |
| Series | 53632 |
$313.70
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Specialty Sockets; Socket Type: Non-Impact; Drive Size: 1/2; Socket Size: 1-1/8 in; Finish: Satin
Item #: 05417316
Brand: EGA Master
Model #: 71200
Product Specifications
| Socket Type | Non-Impact |
| Drive Size | 1/2 |
| Socket Size | 1-1/8 in |
| Finish | Satin |
| Insulated | No |
| Non-sparking | Yes |
| Overall Length (mm) | 46.0000 |
| Number Of Points | 6 |
| UNSPSC Code | 27111704 |
$496.25
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 4.00 mm Dia, 11.00 mm LOC, 3 Flute, 0.10 mm Chamfer Width, Solid Carbide
Item #: 04921243
Brand: WNT
Model #: 5359804000
Product Specifications
| Mill Diameter (mm) | 4.00 |
| Number Of Flutes | 3 |
| Length of Cut (mm) | 11.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | PCD |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.10 |
| Overall Length (mm) | 57.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Short |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (mm) | 6.00 |
| Neck Diameter (mm) | 3.700 |
| UNSPSC Code | 23241614 |
| Series | 53598 |
$38.50
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It