Fasteners > Circuit Board Fasteners (ET04) - (9486 Products)
#25 Dia. × 0.2362″ Shank × 0.6693″ Usable Length × 2.5984″ OAL, 3xD, 140 Degree, AlTiN, 2 Flute, Coolant Through, HP Patriot Solid Carbide Drill
Item #: AV41928000070
Brand: Keo
Model #: 928-000-070
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #25 |
| Shank Length (LS) | 1.4173″ |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #25 |
| Shank Type | Round |
| Length Group | 3xD |
| Measurement Type | Wire Gauge |
| Coating | TiAlN |
| Usable Length (LU) | 0.6693″ |
| Connection Diameter Machine Side (DCONMS) | 0.2362″ |
| Overall Length (OAL) | 2.5984″ |
| Coolant Supply Property (CSP) | Coolant Thru |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 140 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 0.9449″ |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.266″ Dia. × 0.266″ Shank Dia. × 3-1/2″ OAL × 2-1/8″ LCF, 118 Degrees, 2 Flute, Uncoated, Solid Carbide Drills
Item #: TA15TC19108
Brand: Titan USA
Model #: TC19108
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 0.266″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 0.266″ |
| Measurement Type | Inch |
| Coating | Uncoated |
| Usable Length (LU) | 2-1/8″ |
| Connection Diameter Machine Side (DCONMS) | 0.266″ |
| Length Chip Flute (LCF) | 2-1/8″ |
| Point Angle (SIG) | 118 Degrees |
| Overall Length (OAL) | 3-1/2″ |
| Functional Length (LF) | 2-1/8″ |
| Flute Count (NOF) | 2 |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
11.9 mm Dia. × 12 mm Shank Dia. × 122 mm OAL, 140 Degrees, 3xD, 2 Flutes, Aqua Revo D, Solid Carbide Drills
Item #: AC880776077
Brand: Nachi America Inc
Model #: 0776077
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 11.9 mm |
| Functional Length (LF) | 63 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 11.9 mm |
| Tool Type | Drill |
| Length Group | 3xD |
| Usable Length (LU) | 65 mm |
| Coating | Aqua Revo D |
| Overall Length (OAL) | 122 mm |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 12 mm |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 140 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/64″ Drill DIA × 60° Included High Speed Steel #1 Combined Drill and Countersink, 2 Flutes, AlTiN Coated
Item #: TA15CS35001
Brand: Titan USA
Model #: CS35001
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 3/64″ |
| Overall Length (OAL) | 1-1/4″ |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 3/64″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Decimal Equivalent | 0.0469″ |
| Coating | AlTiN |
| Point Angle (SIG) | 118 Degrees |
| Cutting Edge Material | HSS |
| Angle | 60 Degrees |
| Measurement Type | Inch |
| Protruding Length (LPR) | 3/64″ |
| Tool Type | Combined Drill and Countersink |
| Flute Count (NOF) | 2 |
| Single / Double End | Double End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
#40 Dia. × 0.1575″ Shank × 0.6693″ Usable Length × 2.2835″ OAL, 5xD, 140 Degree, AlTiN, 2 Flute, Coolant Through, HP Patriot Solid Carbide Drill
Item #: AV41928000285
Brand: Keo
Model #: 928-000-285
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #40 |
| Shank Length (LS) | 1.1024″ |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #40 |
| Shank Type | Round |
| Length Group | 5xD |
| Measurement Type | Wire Gauge |
| Coating | TiAlN |
| Usable Length (LU) | 0.6693″ |
| Connection Diameter Machine Side (DCONMS) | 0.1575″ |
| Overall Length (OAL) | 2.2835″ |
| Coolant Supply Property (CSP) | Coolant Thru |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 140 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 0.8661″ |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/64″ Drill DIA × 60° Included Cobalt #1 Combined Drill and Countersink, 2 Flutes, AlTiN Coated
Item #: TA15CS37001
Brand: Titan USA
Model #: CS37001
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 3/64″ |
| Overall Length (OAL) | 1-1/4″ |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 3/64″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Decimal Equivalent | 0.0469″ |
| Coating | AlTiN |
| Point Angle (SIG) | 118 Degrees |
| Cutting Edge Material | HSS M42 |
| Angle | 60 Degrees |
| Measurement Type | Inch |
| Protruding Length (LPR) | 3/64″ |
| Tool Type | Combined Drill and Countersink |
| Flute Count (NOF) | 2 |
| Single / Double End | Double End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
01601 .0800 3F BN ENDMILL
Item #: DD9001601
Brand: KYOCERA SGS Precision Tools
Model #: 01601
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.08″ |
| Neck Length (LN) | 0.64″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Length Group | 3D |
| Depth of Cut Maximum (APMX) | 0.24″ |
| End Shape | Ball Nose |
| Overall Length (OAL) | 2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | Uncoated |
| Body Material | Carbide |
| Flute Count (NOF) | 3 |
| Series/List # | M3B |
| Flute Helix Angle (FHA) | 30 Degrees |
| Shank Length (LS) | 1.36″ |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| Usable Length (LU) | 0.24″ |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | Other Non-Metallic Materials | |
| Single / Double End | Single End |
| Neck Diameter (DN) | 0.94″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4739 ST FL RHC REAMER
Item #: MW205000004739
Brand: Monster Tool Company
Model #: 500-0004739
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4739″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-3/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-3/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4739″ |
| Decimal Equivalent | 0.4739″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 0.085″ Dia. × 3/4″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, Uncoated
Item #: TA15TC52867
Brand: Titan USA
Model #: TC52867
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.085″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 1-1/4″ |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Corner Radius (RE) | 0.0425″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Uncoated |
| Center Cutting | Yes |
| Flute Count (NOF) | 3 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
04111 .0050 3F SQ ENDMILL
Item #: DD9004111
Brand: KYOCERA SGS Precision Tools
Model #: 04111
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.005″ |
| Tool Type | Solid Carbide Endmill |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Length Group | 3D |
| Depth of Cut Maximum (APMX) | 0.015″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 1-1/2″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | Uncoated |
| Series/List # | M3S |
| Flute Count (NOF) | 3 |
| Shank Size (SS) | 1/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Shank Length (LS) | 1.485″ |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Square |
| Single / Double End | Single End |
| Usable Length (LU) | 0.015″ |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | Other Non-Metallic Materials | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HAL-RN-L-20375 ZPLUS COATED
Item #: HS1002237
Brand: Helical Solutions
Model #: 02237
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Neck Diameter (DN) | 0.356″ |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Neck Length (LN) | 2.625″ |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Length Group | 1D |
| Overall Length (OAL) | 6″ |
| Decimal Equivalent | 0.375″ |
| Coating | ZPLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Shank Length (LS) | 2.875″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 0.005″ Dia. × 1/64″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 2 FL, Carbide, AlTiN
Item #: TA15TC57205
Brand: Titan USA
Model #: TC57205
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.005″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 1/64″ |
| Depth of Cut Maximum (APMX) | 1/64″ |
| Corner Radius (RE) | 0.0025″ |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiAlN |
| Center Cutting | Yes |
| Flute Count (NOF) | 2 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SIGEL 1210BEH, Internal Grooving Toolholder
Item #: KY96THC04738
Brand: Kyocera Precision Tools
Model #: THC04738
| Product Specifications | |
|---|---|
| Cutting Width Minimum (CWN) | 1 mm |
| Connection Diameter Machine Side (DCONMS) | 10 mm |
| Cutting Width Maximum (CWX) | 1 mm |
| Cutting Direction (HAND) | Left Hand |
| Cutting Depth Maximum (CDX) | 2.2 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Shank Height (H) | 9 mm |
| Application | | Int. Grooving | |
| Minimum Bore Diameter (DMIN) | 12 mm |
| Body Material | Steel |
| Functional Width (WF) | 7 mm |
| Series/List # | SIGE |
| Functional Length (LF) | 125 mm |
| Measurement Type | Metric |
| Head Length (LH) | 30 mm |
| Shank Length (LS) | 95 mm |
| Overall Length (OAL) | 125 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SIGCR 1216EH, Internal Grooving Toolholder
Item #: KY96THC14903
Brand: Kyocera Precision Tools
Model #: THC14903
| Product Specifications | |
|---|---|
| Cutting Width Minimum (CWN) | 1 mm |
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| Cutting Width Maximum (CWX) | 3 mm |
| Cutting Direction (HAND) | Right Hand |
| Cutting Depth Maximum (CDX) | 2.2 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Shank Height (H) | 15 mm |
| Application | | Int. Grooving | Small Parts Machining | |
| Minimum Bore Diameter (DMIN) | 12 mm |
| Body Material | Steel |
| Functional Width (WF) | 6 mm |
| Series/List # | SIGC |
| Functional Length (LF) | 110 mm |
| Measurement Type | Metric |
| Head Length (LH) | 25 mm |
| Shank Length (LS) | 85 mm |
| Overall Length (OAL) | 110 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HEV-S-50250-R.020 APLUS COATED
Item #: HS1034107
Brand: Helical Solutions
Model #: 34107
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Corner Radius (RE) | 0.02″ |
| Depth of Cut Maximum (APMX) | 3/8″ |
| Length Group | 1.5D |
| Overall Length (OAL) | 2″ |
| Decimal Equivalent | 0.25″ |
| Coating | APLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 5 |
| Shank Length (LS) | 1.625″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/4-4FL FUSION-STUB w/.020R AlTiCrN
Item #: MW21284000444
Brand: Monster Tool Company
Model #: 284-000444
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Corner Radius (RE) | 0.02″ |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | Stub |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.25″ |
| Coating | AlTiCrN |
| Series/List # | 284 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | Variable |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HEV-S-50375-R.090 APLUS COATED
Item #: HS1045214
Brand: Helical Solutions
Model #: 45214
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Corner Radius (RE) | 0.09″ |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Length Group | 1D |
| Overall Length (OAL) | 2″ |
| Decimal Equivalent | 0.375″ |
| Coating | APLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 5 |
| Shank Length (LS) | 1.5″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
04023 .0250 2FL 0.005 EM
Item #: DD9004023
Brand: KYOCERA SGS Precision Tools
Model #: 04023
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.025″ |
| Neck Diameter (DN) | 0.0235″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Tool Type | Solid Carbide Endmill |
| Depth of Cut Maximum (APMX) | 0.075″ |
| Length Group | 3D |
| Overall Length (OAL) | 1-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | AlTiN |
| Body Material | Carbide |
| Flute Count (NOF) | 2 |
| Series/List # | M2C |
| Flute Helix Angle (FHA) | 30 Degrees |
| Shank Size (SS) | 1/8″ |
| Shank Type | Round |
| Shank Length (LS) | 1.425″ |
| End Shape | Corner Radius |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.005″ |
| Usable Length (LU) | 0.075″ |
| Cutting Direction (HAND) | Right Hand |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | Other Non-Metallic Materials | |
| Single / Double End | Single End |
| Corner Radius (RE) | 0.005″ |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HEV-S-50187 APLUS COATED
Item #: HS1044062
Brand: Helical Solutions
Model #: 44062
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Length Group | 1.5D |
| Depth of Cut Maximum (APMX) | 5/16″ |
| Decimal Equivalent | 0.1875″ |
| Overall Length (OAL) | 2″ |
| Measurement Type | Inch |
| Coating | APLUS |
| Shank Length (LS) | 1.6875″ |
| Flute Count (NOF) | 5 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
04022 .0250 2FL 0.005 EM
Item #: DD9004022
Brand: KYOCERA SGS Precision Tools
Model #: 04022
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.025″ |
| Neck Diameter (DN) | 0.0235″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Tool Type | Solid Carbide Endmill |
| Depth of Cut Maximum (APMX) | 0.075″ |
| Length Group | 3D |
| Overall Length (OAL) | 1-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | Uncoated |
| Body Material | Carbide |
| Flute Count (NOF) | 2 |
| Series/List # | M2C |
| Flute Helix Angle (FHA) | 30 Degrees |
| Shank Size (SS) | 1/8″ |
| Shank Type | Round |
| Shank Length (LS) | 1.425″ |
| End Shape | Corner Radius |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.005″ |
| Usable Length (LU) | 0.075″ |
| Cutting Direction (HAND) | Right Hand |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | Other Non-Metallic Materials | |
| Single / Double End | Single End |
| Corner Radius (RE) | 0.005″ |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It