NL-A

3-jaw long stroke through-hole power chuck (adapter included)

• CRANK structure N type extra long stroke.
• High-strength alloy, all sliding surfaces are hardening and grinding.
• Can clamp over workpieces with highly uneven surface.
• The installation is the same as N type chuck replaceable change.

NB-200A

3-jaw extra large through-hole power chuck (adapter included)

• More large bore: The largest bore in wedge type power operated chucks.
• 20% large bore: Approximately 20% higher speed, higher gripping force and larger bore compared with regular chucks.
• Model NB-200A chucks are assembled with adaptor for ASA B5.9 type A spindles.
• Model NB-200A chucks are manufactured form high grade alloy steel. All sliding surfaces are hardened and ground for accurate actual running and long service repeatability.

NB-200A

3-jaw extra large through-hole power chuck (adapter included)

• More large bore: The largest bore in wedge type power operated chucks.
• 20% large bore: Approximately 20% higher speed, higher gripping force and larger bore compared with regular chucks.
• Model NB-200A chucks are assembled with adaptor for ASA B5.9 type A spindles.
• Model NB-200A chucks are manufactured form high grade alloy steel. All sliding surfaces are hardened and ground for accurate actual running and long service repeatability.

NB-200A

3-jaw extra large through-hole power chuck (adapter included)

• More large bore: The largest bore in wedge type power operated chucks.
• 20% large bore: Approximately 20% higher speed, higher gripping force and larger bore compared with regular chucks.
• Model NB-200A chucks are assembled with adaptor for ASA B5.9 type A spindles.
• Model NB-200A chucks are manufactured form high grade alloy steel. All sliding surfaces are hardened and ground for accurate actual running and long service repeatability.

NB-200A

3-jaw extra large through-hole power chuck (adapter included)

• More large bore: The largest bore in wedge type power operated chucks.
• 20% large bore: Approximately 20% higher speed, higher gripping force and larger bore compared with regular chucks.
• Model NB-200A chucks are assembled with adaptor for ASA B5.9 type A spindles.
• Model NB-200A chucks are manufactured form high grade alloy steel. All sliding surfaces are hardened and ground for accurate actual running and long service repeatability.

NB-200A

3-jaw extra large through-hole power chuck (adapter included)

• More large bore: The largest bore in wedge type power operated chucks.
• 20% large bore: Approximately 20% higher speed, higher gripping force and larger bore compared with regular chucks.
• Model NB-200A chucks are assembled with adaptor for ASA B5.9 type A spindles.
• Model NB-200A chucks are manufactured form high grade alloy steel. All sliding surfaces are hardened and ground for accurate actual running and long service repeatability.

NB-200A

3-jaw extra large through-hole power chuck (adapter included)

• More large bore: The largest bore in wedge type power operated chucks.
• 20% large bore: Approximately 20% higher speed, higher gripping force and larger bore compared with regular chucks.
• Model NB-200A chucks are assembled with adaptor for ASA B5.9 type A spindles.
• Model NB-200A chucks are manufactured form high grade alloy steel. All sliding surfaces are hardened and ground for accurate actual running and long service repeatability.

NB-200A

3-jaw extra large through-hole power chuck (adapter included)

• More large bore: The largest bore in wedge type power operated chucks.
• 20% large bore: Approximately 20% higher speed, higher gripping force and larger bore compared with regular chucks.
• Model NB-200A chucks are assembled with adaptor for ASA B5.9 type A spindles.
• Model NB-200A chucks are manufactured form high grade alloy steel. All sliding surfaces are hardened and ground for accurate actual running and long service repeatability.

NB-200A

3-jaw extra large through-hole power chuck (adapter included)

• More large bore: The largest bore in wedge type power operated chucks.
• 20% large bore: Approximately 20% higher speed, higher gripping force and larger bore compared with regular chucks.
• Model NB-200A chucks are assembled with adaptor for ASA B5.9 type A spindles.
• Model NB-200A chucks are manufactured form high grade alloy steel. All sliding surfaces are hardened and ground for accurate actual running and long service repeatability.

NB-200A

3-jaw extra large through-hole power chuck (adapter included)

• More large bore: The largest bore in wedge type power operated chucks.
• 20% large bore: Approximately 20% higher speed, higher gripping force and larger bore compared with regular chucks.
• Model NB-200A chucks are assembled with adaptor for ASA B5.9 type A spindles.
• Model NB-200A chucks are manufactured form high grade alloy steel. All sliding surfaces are hardened and ground for accurate actual running and long service repeatability.

NIT-200

4-jaw through-hole power chuck (adapter excluded)

• All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each master jaw.
• Master jaw : 1.5mmx60° serration.
• Mounting : Adaptor mounting to fit with DIN, ISO, BS, ASA B5.9 type A spindles.

NHT-200

2-jaw and 3-jaw through-hole power chuck (adapter included)

• Gripping of round or irregular workpiece does not need to change the chuck.
• The chucks are designed according to ASA B5.9 type A spindle.
• The chucks are made from high grade alloy steel. All sliding surfaces are hardened and ground to increase running accuracy and longer service life.

NIT-200

4-jaw through-hole power chuck (adapter excluded)

• All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each master jaw.
• Master jaw : 1.5mmx60° serration.
• Mounting : Adaptor mounting to fit with DIN, ISO, BS, ASA B5.9 type A spindles.

NHT-200

2-jaw and 3-jaw through-hole power chuck (adapter included)

• Gripping of round or irregular workpiece does not need to change the chuck.
• The chucks are designed according to ASA B5.9 type A spindle.
• The chucks are made from high grade alloy steel. All sliding surfaces are hardened and ground to increase running accuracy and longer service life.

NIT-200

4-jaw through-hole power chuck (adapter excluded)

• All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each master jaw.
• Master jaw : 1.5mmx60° serration.
• Mounting : Adaptor mounting to fit with DIN, ISO, BS, ASA B5.9 type A spindles.

NIT-200

4-jaw through-hole power chuck (adapter excluded)

• All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each master jaw.
• Master jaw : 1.5mmx60° serration.
• Mounting : Adaptor mounting to fit with DIN, ISO, BS, ASA B5.9 type A spindles.

NIT-200

4-jaw through-hole power chuck (adapter excluded)

• All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each master jaw.
• Master jaw : 1.5mmx60° serration.
• Mounting : Adaptor mounting to fit with DIN, ISO, BS, ASA B5.9 type A spindles.

NIT-200

4-jaw through-hole power chuck (adapter excluded)

• All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each master jaw.
• Master jaw : 1.5mmx60° serration.
• Mounting : Adaptor mounting to fit with DIN, ISO, BS, ASA B5.9 type A spindles.

NIT-200

4-jaw through-hole power chuck (adapter excluded)

• All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each master jaw.
• Master jaw : 1.5mmx60° serration.
• Mounting : Adaptor mounting to fit with DIN, ISO, BS, ASA B5.9 type A spindles.

NT-200

2-jaw through-hole power chuck (adapter excluded)

• All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each base jaw.
• Base jaw : 1.5mmx60° serration.
• Mounting : Adaptor mounting to fit with DIN, ISO, BS, ASA B5.9 type A spindles.