2 - Air Hardening Flat Stock

Item #: LY55605
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: A-2 *Thick: 3/32 *Width: 1-1/2

Description:
*A-2 Air Hardening Ground Flat Stock 18" Length *Made from fine grain, electric furnace air-hardening, 5 chrome tool steel *Has excellent wear and abrasion resistance properties *Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections. *Low sulphur content makes it non-freemachining. *HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately. *Tolerance Thickness ±.001" Width +.000/.005" *Larger Sizes A-2 available thru 1" thickness *Oversize tolerances available thru 2" thickness *Many other types of gage stock available *Modified Nutec 42 *A-6 Diecrat *D-2 Aristocrat *S-7 *C-1018 Marshallcrat low carbon

Shipping Info:
*Actual Weight - .7300

$44.26

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8 x 3 x 36 - A6 Air Hardening Precision Ground Flat Stock

Item #: LY4459043
Manufacturer: Starrett
Mfg #: 59043

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-6 *Thick: 3/8 *Width: 3

Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance *Lower heat treating temperature results in deep hardness and minimum distortion

Shipping Info:
*Actual Weight - 11.4700

$903.57

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1 x 1 x 36 - High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4269358
Manufacturer: Starrett
Mfg #: 69358

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: D-2 *Thick: 1 *Width: 1

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 10.2000

$416.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 1/4 x 2-1/2 - Oversize Oil Hardening Flat Stock

Item #: LY601612
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: O-1 *Thick: 1/4 *Width: 2-1/2

Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock *Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis *Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools *Width +.010/.015 *Thickness +10.010/.015 *Squareness edge to surface .003 per inch of thickness *Finish 10-25 micro inches

Shipping Info:
*Actual Weight - 3.4000

$67.33

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/16X2-1/2X24 CARBON FLAT STOCK

Item #: LY8000455
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA

Description:

Shipping Info:
*Actual Weight - 3.2300

$93.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/16 x 1-1/2 x 36 - Oversize High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4369507
Manufacturer: Starrett
Mfg #: 69507

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: D-2 *Thick: 3/16 *Width: 1-1/2

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 2.8700

$198.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 3/8 x 1-3/4 - Oversize Air Hardening Flat Stock

Item #: LY702408
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: A-2 *Thick: 3/8 *Width: 1-3/4

Description:
*Oversize A-2 Air Hardening Ground Flat Stock

Shipping Info:
*Actual Weight - 3.5200

$93.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 5/32 x 5/32 - Oil Hardening Flat Stock

Item #: LY4054027
Manufacturer: Starrett
Mfg #: 54027

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: O-1 *Thick: 5/32 *Width: 5/32

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - .1300

$52.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1 x 1 x 18 - Oversize High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4369472
Manufacturer: Starrett
Mfg #: 69472

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: D-2 *Thick: 1 *Width: 1

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 5.1000

$212.51

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 5/16 x 1-1/2 - Oil Hardening Flat Stock

Item #: LY4054106
Manufacturer: Starrett
Mfg #: 54106

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: O-1 *Thick: 5/16 *Width: 1-1/2

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 2.4200

$91.86

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/16 x 2 x 36 - A6 Air Hardening Precision Ground Flat Stock

Item #: LY4459020
Manufacturer: Starrett
Mfg #: 59020

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-6 *Thick: 5/16 *Width: 2

Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance *Lower heat treating temperature results in deep hardness and minimum distortion

Shipping Info:
*Actual Weight - 6.3700

$550.22

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/16 x 3 x 24 - 498 Low Carbon Precision Ground Flat Stock

Item #: LY8054928
Manufacturer: Starrett
Mfg #: 54928

Technical Specifications:
*Brand Name: Starrett *Length: 24 *Material: LC *Thick: 3/16 *Width: 3

Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost * Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc. *This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher. *Furnished in 24" (610mm) lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 3.8200

$202.58

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 5/16 x 1-3/4 - Oil Hardening Flat Stock

Item #: LY4057240
Manufacturer: Starrett
Mfg #: 57240

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 5/16 *Width: 1-3/4

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 5.6400

$189.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 1/8 x 6 - Oversize Air Hardening Flat Stock

Item #: LY4657554
Manufacturer: Starrett
Mfg #: 57554

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: A-2 *Thick: 1/8 *Width: 6

Description:
*A-2 Air Hardening Ground Flat Stock 18" Length *Made from fine grain, electric furnace air-hardening, 5 chrome tool steel *Has excellent wear and abrasion resistance properties *Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections. *Low sulphur content makes it non-freemachining. *HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately. *Tolerance Thickness ±.001" Width +.000/.005" *Larger Sizes A-2 available thru 1" thickness *Oversize tolerances available thru 2" thickness *Many other types of gage stock available *Modified Nutec 42 *A-6 Diecrat *D-2 Aristocrat *S-7 *C-1018 Marshallcrat low carbon

Shipping Info:
*Actual Weight - 4.2600

$221.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/8 x 8 x 36 - Oversize Air Hardening Flat Stock

Item #: LY4657435
Manufacturer: Starrett
Mfg #: 57435

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-2 *Thick: 5/8 *Width: 8

Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance *Oversize: +.010"/.015" thickness tolerance *Maintains close dimensional accuracy throughout the heat treating process *The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life. *Up to 50% more pieces per sharpening can be produced than with oil hardening steel *High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material *Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof *Full-length identification eliminates confusion with other steels *Furnished in 18" and 36" lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 50.9900

$1,863.26

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/4 x 5/16 x 36 - A6 Air Hardening Precision Ground Flat Stock

Item #: LY4458989
Manufacturer: Starrett
Mfg #: 58989

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-6 *Thick: 1/4 *Width: 5/16

Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance *Lower heat treating temperature results in deep hardness and minimum distortion

Shipping Info:
*Actual Weight - .8000

$480.86

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 1 x 5 - Oil Hardening Flat Stock

Item #: LY4054220
Manufacturer: Starrett
Mfg #: 54220

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: O-1 *Thick: 1 *Width: 5

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 25.7800

$569.98

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1/8 x 4 - Oil Hardening Flat Stock

Item #: LY4054309
Manufacturer: Starrett
Mfg #: 54309

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 1/8 *Width: 4

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 5.1600

$214.10

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 7/8 x 6 - Oil Hardening Flat Stock

Item #: LY5005609
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: O-1 *Thick: 7/8 *Width: 6

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 27.1600

$374.65

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1 x 2 x 36 - Oversize High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4369589
Manufacturer: Starrett
Mfg #: 69589

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: D-2 *Thick: 1 *Width: 2

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 20.4000

$773.39

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It