BES Up To 2022 $250-$5000 Products - (161414 Products)
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.1456M
Item #: 00151944
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-2.1456MProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00002/-0.00002
Blank Number Wire Size
#7
Inner Diameter (Decimal Inch)
2.1456
Calibrated
No
Traceability Certification Included
No
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1″ × 1″ × 2-1/4″ × 5″ RHS / RHC Solid Carbide 3-Flute Square End High-Performance Roughing End Mill - Bright
Item #: BA10B03564
Brand: Bassett
Model #: B03564
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Applicable Material | Aluminum / Non-Ferrous Materials |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 2-1/4″ |
| Length Group | Long |
| Overall Length (OAL) | 5″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 1″ |
| Coating | Bright |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Series/List # | MRA |
| Flute Helix Angle (FHA) | CW |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Weldon |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/8″ × 7/8″ × 2-1/4″ × 5″ RHS / RHC Solid Carbide 4-Flute Square Nose Single End General Purpose End Mill - TiAlN
Item #: BA10B68268
Brand: Bassett
Model #: B68268
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/8″ |
| Tool Type | End Mill |
| Connection Diameter Machine Side (DCONMS) | 7/8″ |
| Length Group | Long |
| Depth of Cut Maximum (APMX) | 2-1/4″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 5″ |
| Decimal Equivalent | 0.875″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlTiN |
| Series/List # | MSE-4-TA |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | CW |
| Single / Double End | Single End |
| Shank Type | Round |
| Center Cutting | Yes |
| End Shape | Square |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1″ Dia. × 1″ Shank × 2-1/4″ DOC × 5″ OAL, Carbide Bright, Spiral , 4 Flute, CW Helix, Round, Ballnose End Mill
Item #: CE60C63578
Brand: Cleveland
Model #: C63578
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Tool Type | End Mill |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Length Group | Long |
| Depth of Cut Maximum (APMX) | 2-1/4″ |
| End Shape | Ball Nose |
| Overall Length (OAL) | 5″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 1″ |
| Coating | Bright |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Series/List # | CEM-SE-4B |
| Flute Helix Angle (FHA) | CW |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1″ Dia. × 1″ Shank × 2-1/4″ DOC × 5″ OAL, Carbide TiN, Spiral , 4 Flute, 30° Helix, Ballnose End Mill
Item #: DD9031779
Brand: KYOCERA SGS Precision Tools
Model #: 31779
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 2-1/4″ |
| Usable Length (LU) | 2-3/4″ |
| Overall Length (OAL) | 5″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Style | Ball Nose |
| Coating | TiN |
| Decimal Equivalent | 1″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1″ Dia. × 1″ Shank × 2-1/4″ DOC × 5″ OAL, Carbide TiCN, Spiral , 4 Flute, 30° Helix, Ballnose End Mill
Item #: DD9031789
Brand: KYOCERA SGS Precision Tools
Model #: 31789
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 2-1/4″ |
| Usable Length (LU) | 2-3/4″ |
| Overall Length (OAL) | 5″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Style | Ball Nose |
| Coating | TiCN |
| Decimal Equivalent | 1″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1″ Dia. × 1″ Shank × 2-1/4″ DOC × 5″ OAL, Carbide AlTiN, Spiral , 4 Flute, 30° Helix, Ballnose End Mill
Item #: DD9031799
Brand: KYOCERA SGS Precision Tools
Model #: 31799
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 2-1/4″ |
| Usable Length (LU) | 2-3/4″ |
| Overall Length (OAL) | 5″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Style | Ball Nose |
| Coating | AlTiN |
| Decimal Equivalent | 1″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
FMHV-301-32-TC-CB 1-IN DI
Item #: RJ4132540
Brand: Robb Jack
Model #: FMHV-301-32-TC-CB
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| End Shape | Square |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Usable Length (LU) | 2-1/8″ |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 1″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Series/List # | FMHV-301 |
| Flute Helix Angle (FHA) | 37 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
FMHV-201-32-TC-CB 1-IN DI
Item #: RJ4121100
Brand: Robb Jack
Model #: FMHV-201-32-TC-CB
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| End Shape | Square |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Usable Length (LU) | 2-1/8″ |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 1″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Series/List # | FMHV-201 |
| Flute Helix Angle (FHA) | 37 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
FMHV-302-32-BN-TC 1-IN DI
Item #: RJ4135480
Brand: Robb Jack
Model #: FMHV-302-32-BN-TC
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| End Shape | Ball |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Usable Length (LU) | 2-5/8″ |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Corner Radius (RE) | 1/2″ |
| Overall Length (OAL) | 4-1/2″ |
| Tool Type | Solid Carbide Endmill |
| Coating | Uncoated |
| Decimal Equivalent | 1″ |
| Flute Count (NOF) | 3 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 37 Degrees |
| Series/List # | FMHV-302 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
FMHV-202-32-BN-TC 1-IN DI
Item #: RJ4124040
Brand: Robb Jack
Model #: FMHV-202-32-BN-TC
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| End Shape | Ball |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Usable Length (LU) | 2-5/8″ |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Corner Radius (RE) | 1/2″ |
| Overall Length (OAL) | 4-1/2″ |
| Tool Type | Solid Carbide Endmill |
| Coating | Uncoated |
| Decimal Equivalent | 1″ |
| Flute Count (NOF) | 2 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 37 Degrees |
| Series/List # | FMHV-202 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
FMHV-305-32-TC 1-IN DIA 3
Item #: RJ41FMHV30532TC
Brand: Robb Jack
Model #: FMHV-305-32-TC
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| End Shape | Square |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Usable Length (LU) | 4-1/8″ |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 6″ |
| Decimal Equivalent | 1″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Series/List # | FMHV-305 |
| Flute Helix Angle (FHA) | 37 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
FMHV-205-32-TC 1-IN DIA 2
Item #: RJ41FMHV20532TC
Brand: Robb Jack
Model #: FMHV-205-32-TC
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| End Shape | Square |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Usable Length (LU) | 4-1/8″ |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 6″ |
| Decimal Equivalent | 1″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Series/List # | FMHV-205 |
| Flute Helix Angle (FHA) | 37 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
FMHV-305-32-TC-CB 1-IN DI
Item #: RJ4140980
Brand: Robb Jack
Model #: FMHV-305-32-TC-CB
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| End Shape | Square |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Usable Length (LU) | 4-1/8″ |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 6″ |
| Decimal Equivalent | 1″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Series/List # | FMHV-305 |
| Flute Helix Angle (FHA) | 37 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
MFMHV-305-25-TC 25MM DIA
Item #: RJ4170550
Brand: Robb Jack
Model #: MFMHV-305-25-TC
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 25 mm |
| Flute Helix Angle (FHA) | 37 Degrees |
| Connection Diameter Machine Side (DCONMS) | 25 mm |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 32 mm |
| Usable Length (LU) | 104 mm |
| Overall Length (OAL) | 152 mm |
| Tool Type | Solid Carbide Endmill |
| Coating | Uncoated |
| Measurement Type | Metric |
| Flute Count (NOF) | 3 |
| Series/List # | MFMHV-305 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
MFMHV-205-25-TC 25MM DIA
Item #: RJ4156970
Brand: Robb Jack
Model #: MFMHV-205-25-TC
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 25 mm |
| Flute Helix Angle (FHA) | 37 Degrees |
| Connection Diameter Machine Side (DCONMS) | 25 mm |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 32 mm |
| Usable Length (LU) | 104 mm |
| Overall Length (OAL) | 152 mm |
| Tool Type | Solid Carbide Endmill |
| Coating | Uncoated |
| Measurement Type | Metric |
| Flute Count (NOF) | 2 |
| Series/List # | MFMHV-205 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1″ End Mill 3FL .030R TB - S-CARB CB 1x1x2-5/8x6
Item #: DD9233482
Brand: KYOCERA SGS Precision Tools
Model #: 33482
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 2-5/8″ |
| Usable Length (LU) | 3-7/8″ |
| Overall Length (OAL) | 6″ |
| Corner Radius (RE) | 0.03″ |
| Cutting Edge Material | Carbide |
| Flute Type | Spiral |
| Coating | TB |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 3 |
| Decimal Equivalent | 1″ |
| Flute Helix Angle (FHA) | 38 Degrees |
| Series/List # | S-CARB |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1″ Dia. × 1″ Shank × 1-1/2″ DOC × 7″ OAL, Sistral, 7 Flute, Variable Helix, Straight, External, Bullnose, Solid End Mill
Item #: CW8057548
Brand: Precision Cutting Tools
Model #: 9585155
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Neck Diameter (DN) | 0.97″ |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Peripheral Effective Cutting Edge Count (ZEFP) | 7 |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 7″ |
| Maximum Feed per Tooth (fz(max)) | 0.0065″ |
| Coating | Sistral |
| Minimum Feed per Tooth (fz(min)) | 0.0025″ |
| Flute Count (NOF) | 7 |
| Length Group | Long - Necked |
| Flute Helix Angle (FHA) | Variable |
| Coolant Supply Property (CSP) | External |
| Shank Type | Straight |
| Shank Standard | h6 |
| End Shape | Bullnose |
| Body Material | Carbide |
| Usable Length (LU) | 5″ |
| Style | Necked |
| Applicable Material | Stainless Steel | Super-Alloys / Titanium |
| Decimal Equivalent | 1″ |
| Application | HEM | Semi-Finish | Finish |
| Measurement Type | Inch |
| Corner Radius (RE) | 0.09″ |
| Series/List # | 740 |
| Grade | A5007 |
| Shank Size (SS) | 1″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1″ Dia. × 1″ Shank × 1-1/2″ DOC × 7″ OAL, Sistral, 7 Flute, Variable Helix, Straight, External, Bullnose, Solid End Mill
Item #: CW8057860
Brand: Precision Cutting Tools
Model #: 9585348
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Neck Diameter (DN) | 0.97″ |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Peripheral Effective Cutting Edge Count (ZEFP) | 7 |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 7″ |
| Maximum Feed per Tooth (fz(max)) | 0.0065″ |
| Coating | Sistral |
| Minimum Feed per Tooth (fz(min)) | 0.0025″ |
| Flute Count (NOF) | 7 |
| Length Group | Long - Necked |
| Flute Helix Angle (FHA) | Variable |
| Coolant Supply Property (CSP) | External |
| Shank Type | Straight |
| Shank Standard | h6 |
| End Shape | Bullnose |
| Body Material | Carbide |
| Usable Length (LU) | 5″ |
| Style | Necked |
| Applicable Material | Stainless Steel | Super-Alloys / Titanium |
| Decimal Equivalent | 1″ |
| Application | HEM | Semi-Finish | Finish |
| Measurement Type | Inch |
| Corner Radius (RE) | 0.125″ |
| Series/List # | 740 |
| Grade | A5007 |
| Shank Size (SS) | 1″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1″ Dia. × 1″ Shank × 1-1/2″ DOC × 7″ OAL, Sistral, 7 Flute, Variable Helix, Straight, External, Bullnose, Solid End Mill
Item #: CW8057220
Brand: Precision Cutting Tools
Model #: 9584930
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Neck Diameter (DN) | 0.97″ |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Peripheral Effective Cutting Edge Count (ZEFP) | 7 |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 7″ |
| Maximum Feed per Tooth (fz(max)) | 0.0065″ |
| Coating | Sistral |
| Minimum Feed per Tooth (fz(min)) | 0.0025″ |
| Flute Count (NOF) | 7 |
| Length Group | Long - Necked |
| Flute Helix Angle (FHA) | Variable |
| Coolant Supply Property (CSP) | External |
| Shank Type | Straight |
| Shank Standard | h6 |
| End Shape | Bullnose |
| Body Material | Carbide |
| Usable Length (LU) | 5″ |
| Style | Necked |
| Applicable Material | Stainless Steel | Super-Alloys / Titanium |
| Decimal Equivalent | 1″ |
| Application | HEM | Semi-Finish | Finish |
| Measurement Type | Inch |
| Corner Radius (RE) | 0.06″ |
| Series/List # | 740 |
| Grade | A5007 |
| Shank Size (SS) | 1″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It