5/32 x 10 x 24 - 498 Low Carbon Precision Ground Flat Stock

Item #: LY8058292
Manufacturer: Starrett
Mfg #: 58292

Technical Specifications:
*Brand Name: Starrett *Length: 24 *Material: LC *Thick: 5/32 *Width: 10

Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost * Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc. *This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher. *Furnished in 24" (610mm) lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 10.6200

$404.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 5/8 x 2-1/2 - Oil Hardening Flat Stock

Item #: LY4054467
Manufacturer: Starrett
Mfg #: 54467

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 5/8 *Width: 2-1/2

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 16.1200

$405.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 3/8 x 6 - Oversize Oil Hardening Flat Stock

Item #: LY4157011
Manufacturer: Starrett
Mfg #: 57011

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: O-1 *Thick: 3/8 *Width: 6

Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock *Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis *Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools *Width +.010/.015 *Thickness +10.010/.015 *Squareness edge to surface .003 per inch of thickness *Finish 10-25 micro inches

Shipping Info:
*Actual Weight - 12.0000

$405.09

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 1 x 6 - Oil Hardening Flat Stock

Item #: LY5010011
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: O-1 *Thick: 1 *Width: 6

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 30.8800

$395.70

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/16 x 5 x 36 - High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4269241
Manufacturer: Starrett
Mfg #: 69241

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: D-2 *Thick: 1/16 *Width: 5

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 3.1900

$404.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/4 x 3 x 36 - Oversize High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4369521
Manufacturer: Starrett
Mfg #: 69521

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: D-2 *Thick: 1/4 *Width: 3

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 7.6500

$404.40

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 5/8 x 5 - Oil Hardening Flat Stock

Item #: LY4054182
Manufacturer: Starrett
Mfg #: 54182

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: O-1 *Thick: 5/8 *Width: 5

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 16.1100

$402.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 3/8 x 3 - Oversize Oil Hardening Flat Stock

Item #: LY4156853
Manufacturer: Starrett
Mfg #: 56853

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 3/8 *Width: 3

Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock *Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis *Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools *Width +.010/.015 *Thickness +10.010/.015 *Squareness edge to surface .003 per inch of thickness *Finish 10-25 micro inches

Shipping Info:
*Actual Weight - 12.0300

$402.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4X8X24 CARBON FLAT STOCK

Item #: LY8001245
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA

Description:

Shipping Info:
*Actual Weight - 41.2900

$393.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1/8 x 6 - Air Hardening Flat Stock

Item #: LY4554556
Manufacturer: Starrett
Mfg #: 54556

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-2 *Thick: 1/8 *Width: 6

Description:
*A-2 Air Hardening Ground Flat Stock 36" Length *Made from fine grain, electric furnace air-hardening, 5 chrome tool steel *Has excellent wear and abrasion resistance properties *Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections. *Low sulphur content makes it non-freemachining. *HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately. *Tolerance Thickness ±.001" Width +.000/.005" *Larger Sizes A-2 available thru 1" thickness *Oversize tolerances available thru 2" thickness *Many other types of gage stock available *Modified Nutec 42 *A-6 Diecrat *D-2 Aristocrat *S-7 *C-1018 Marshallcrat low carbon

Shipping Info:
*Actual Weight - 7.7300

$401.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1 x 3 - Oil Hardening Flat Stock

Item #: LY5110006
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1 *Width: 3

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 36.2300

$389.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/4 x 6 x 18 - Oversize High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4369410
Manufacturer: Starrett
Mfg #: 69410

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: D-2 *Thick: 1/4 *Width: 6

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 7.6500

$400.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8 x 1/2 x 36 - A6 Air Hardening Precision Ground Flat Stock

Item #: LY4459033
Manufacturer: Starrett
Mfg #: 59033

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-6 *Thick: 3/8 *Width: 1/2

Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance *Lower heat treating temperature results in deep hardness and minimum distortion

Shipping Info:
*Actual Weight - 1.9100

$400.01

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/16 x 5 x 18 - Oversize High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4369420
Manufacturer: Starrett
Mfg #: 69420

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: D-2 *Thick: 5/16 *Width: 5

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 7.9700

$399.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 3/8 x 5 - Oversize Air Hardening Flat Stock

Item #: LY752415
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: A-2 *Thick: 3/8 *Width: 5

Description:
*Oversize A-2 Air Hardening Ground Flat Stock

Shipping Info:
*Actual Weight - 20.0200

$388.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 7/16 x 6 - Oil Hardening Flat Stock

Item #: LY5102811
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 7/16 *Width: 6

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 27.2200

$387.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2 x 4-1/2 x 18 - 496 Oil Hardening Precsision Ground Flat Stock

Item #: LY4157024
Manufacturer: Starrett
Mfg #: 57024

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: O-1 *Thick: 1/2 *Width: 4-1/2

Description:
*AISI 01 oil hardening tool steel. Standard size: +/-.001" thickness tolerance *Dimensionally stable -- can be used for intricate work including thin sections, with a minimum danger of cracking *Ground straight and parallel

Shipping Info:
*Actual Weight - 11.4700

$399.03

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1/2 x 4 - Oversize Air Hardening Flat Stock

Item #: LY753211
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: A-2 *Thick: 1/2 *Width: 4

Description:
*Oversize A-2 Air Hardening Ground Flat Stock

Shipping Info:
*Actual Weight - 21.1900

$387.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1/4 x 5-1/2 - Oil Hardening Flat Stock

Item #: LY4054375
Manufacturer: Starrett
Mfg #: 54375

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 1/4 *Width: 5-1/2

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 14.1800

$398.73

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1/2 x 3 - Oil Hardening Flat Stock

Item #: LY4054445
Manufacturer: Starrett
Mfg #: 54445

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 1/2 *Width: 3

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 15.4700

$398.13

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It