Abrasives > Abrasive Brushes (ET04) - (7284 Products)
Square End Mill: 0.0850" Dia, 0.1280" LOC, 3 Flute, Solid Carbide
Item #: 60243664
Brand: Titan USA
Model #: TC30840
Product Specifications
| Mill Diameter (Decimal Inch) | 0.0850 |
| Number Of Flutes | 3 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.1280 |
| Shank Diameter (Inch) | 1/8 |
| Shank Diameter (Decimal Inch) | 0.1250 |
| Overall Length (Decimal Inch) | 1.5000 |
| Overall Length (Inch) | 1-1/2 |
| Single Or Double End | Single |
| Coating/Finish Family | AlTiN |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 30 |
| Primary Workpiece Material | Aluminum & Non-Ferrous; High-Temp Alloy; Stainless Steel; Cast Iron; Steel |
| Primary Workpiece Material Code | P; S; K; M; N |
| Coating/Finish | AlTiN |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Material Grade | Solid Carbide |
| Series | Micro End Mills - 3 Flute - Square - 30 deg Helix - Stub & Regular Flute |
| System Of Measurement | Decimal Inch |
| UNSPSC Code | 27112803 |
| Mill Diameter (Decimal Inch) | 0.0850 |
| Number Of Flutes | 3 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.1280 |
| Shank Diameter (Inch) | 1/8 |
| Shank Diameter (Decimal Inch) | 0.1250 |
| Overall Length (Decimal Inch) | 1.5000 |
| Overall Length (Inch) | 1-1/2 |
| Single Or Double End | Single |
| Coating/Finish Family | AlTiN |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 30 |
| Primary Workpiece Material | Aluminum & Non-Ferrous; High-Temp Alloy; Stainless Steel; Cast Iron; Steel |
| Primary Workpiece Material Code | P; S; K; M; N |
| Coating/Finish | AlTiN |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Material Grade | Solid Carbide |
| Series | Micro End Mills - 3 Flute - Square - 30 deg Helix - Stub & Regular Flute |
| System Of Measurement | Decimal Inch |
| UNSPSC Code | 27112803 |
| MSC Part # | 60243664 |
| Mfr Part # | TC30840 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$21.63
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Weiler - 320 Grit, 1/2" Brush Diam, Crimped, End Brush - Extra Fine Grade, 1/4" Diam Shank, 10,000 Max RPM
Item #: 75846659
Brand: Weiler
Model #: 10172
Exact Tooling IR#: 04
Features and Benefits
Nylon is used in wet and dry environments. It has a low moisture absorption rate and conforms well to surfaces.
Crimped brushes provide additional strength compared to straight brushes and are commonly used where a knotted brush's impact would alter the working surface.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 1/2 |
| Fill Material | Nylon |
| Filament/Wire Diameter Range (Decimal Inch) | 0.0201 and Above |
| Filament/Wire Diameter (Decimal Inch) | 0.0220 |
| Wire Type | Crimped |
| Bridled | No |
| Pilot | NonPiloted |
| Flared | NonFlared |
| Maximum RPM | 10000 |
| Shank Diameter (Inch) | 1/4 |
| Shank Diameter (mm) | 6 |
| Encapsulated | No |
| Abrasive Material | Silicon Carbide |
| Grit | 320 |
| Grade | Extra Fine |
| Hollow Center | No |
| Shank Included | Yes |
| Trim Length (Inch) | 7/8 |
$13.08
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brush Research Mfg. - 1" Brush Diam, Crimped, End Brush - 1/4" Diam Steel Shank, 20,000 Max RPM
Item #: 81299299
Brand: Brush Research Mfg.
Model #: BNS10S06
Exact Tooling IR#: 04
Features and Benefits
Stainless steel is highly corrosion resistant and can be used in high humidity or wet conditions. It has a higher heat tolerance than steel, allowing use at temperatures up to 600 F on aluminum and stainless steel.
Crimped brushes provide additional strength compared to straight brushes and are commonly used where a knotted brush's impact would alter the working surface.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 1 |
| Fill Material | Stainless Steel |
| Filament/Wire Diameter Range (Decimal Inch) | Up to 0.0100 |
| Filament/Wire Diameter (Decimal Inch) | 0.0060 |
| Wire Type | Crimped |
| Bridled | No |
| Pilot | NonPiloted |
| Flared | NonFlared |
| Maximum RPM | 20000 |
| Shank Diameter (Inch) | 1/4 |
| Encapsulated | No |
| Hollow Center | No |
| Overall Length (Inch) | 2-1/2 |
| Shank Included | Yes |
| Shank Length (Inch) | 3/4 |
| Shank Material | Steel |
| Trim Length (Inch) | 7/8 |
| Brush Diameter (Decimal Inch) | 1 |
| Shank Diameter (Decimal Inch) | 1/4 |
$16.50
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Osborn - 3/4" Brush Diam, Crimped, End Brush - 1/4" Diam Shank, 20,000 Max RPM
Item #: 00126292
Brand: Osborn
Model #: 0003071000
Exact Tooling IR#: 04
Features and Benefits
Stainless steel is highly corrosion resistant and can be used in high humidity or wet conditions. It has a higher heat tolerance than steel, allowing use at temperatures up to 600 F on aluminum and stainless steel.
Crimped brushes provide additional strength compared to straight brushes and are commonly used where a knotted brush's impact would alter the working surface.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 3/4 |
| Fill Material | Stainless Steel |
| Filament/Wire Diameter Range (Decimal Inch) | 0.0101 - 0.0200 |
| Filament/Wire Diameter (Decimal Inch) | 0.0104 |
| Wire Type | Crimped |
| Bridled | No |
| Pilot | NonPiloted |
| Flared | NonFlared |
| Maximum RPM | 20000 |
| Shank Diameter (Inch) | 1/4 |
| Encapsulated | No |
| Overall Length (Inch) | 2-3/4 |
| Trim Length (Inch) | 1 |
$21.36
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Weiler - 1-1/8" Brush Diam, Knotted, End Brush - 1/4" Diam Shank, 20,000 Max RPM
Item #: 75846543
Brand: Weiler
Model #: 10142
Exact Tooling IR#: 04
Features and Benefits
Stainless steel is highly corrosion resistant and can be used in high humidity or wet conditions. It has a higher heat tolerance than steel, allowing use at temperatures up to 600 F on aluminum and stainless steel.
Knotted brushes are made up of multiple filaments/wires bundled together to provide the most aggressive brushing action.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 1-1/8 |
| Fill Material | Stainless Steel |
| Filament/Wire Diameter Range (Decimal Inch) | Up to 0.0100 |
| Filament/Wire Diameter (Decimal Inch) | 0.0060 |
| Wire Type | Knotted |
| Bridled | No |
| Pilot | NonPiloted |
| Flared | NonFlared |
| Maximum RPM | 20000 |
| Shank Diameter (Inch) | 1/4 |
| Shank Diameter (mm) | 6 |
| Encapsulated | No |
| Hollow Center | Yes |
| Shank Included | Yes |
| Trim Length (Inch) | 1 |
$65.15
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Value Collection - 3" Brush Diam, Flared End Brush - Fine Grade, 1/4" Diam Shank, 15,000 Max RPM
Item #: 74038464
Brand: Value Collection
Exact Tooling IR#: 04
Features and Benefits
Brass is softer than steel and stainless steel and will not scratch harder surfaces. It will not generate sparks when brushing metallic surfaces and works best on copper and brass.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 3 |
| Fill Material | Brass |
| Filament/Wire Diameter Range (Decimal Inch) | 0.0101 - 0.0200 |
| Filament/Wire Diameter (Decimal Inch) | 0.0120 |
| Bridled | No |
| Pilot | NonPiloted |
| Flared | Flared |
| Maximum RPM | 15000 |
| Shank Diameter (Inch) | 1/4 |
| Encapsulated | No |
| Grade | Fine |
| Hollow Center | No |
| Shank Included | Yes |
| Trim Length (Inch) | 1-1/4 |
$26.49
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Weiler - 3" Brush Diam, Flared End Brush - 16,000 Max RPM
Item #: 64705148
Brand: Weiler
Model #: 91135
Exact Tooling IR#: 04
Features and Benefits
Steel is the most common filament/wire material due to its durability and cutting action. It is suitable for general purpose applications and can be used on iron, steel, aluminum, brass, copper, and wood.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 3 |
| Fill Material | Steel |
| Filament/Wire Diameter (Decimal Inch) | 0.0080 |
| Flared | Flared |
| Maximum RPM | 16000 |
| Encapsulated | No |
| Hollow Center | No |
| Trim Length (Inch) | 1 |
$32.85
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Osborn - 1-3/4" Brush Diam, Encapsulated, Flared End Brush - 1/4" Diam Shank, 25,000 Max RPM
Item #: 00126789
Brand: Osborn
Model #: 0003075700
Exact Tooling IR#: 04
Features and Benefits
Steel is the most common filament/wire material due to its durability and cutting action. It is suitable for general purpose applications and can be used on iron, steel, aluminum, brass, copper, and wood.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 1-3/4 |
| Fill Material | Steel |
| Filament/Wire Diameter Range (Decimal Inch) | Up to 0.0100 |
| Filament/Wire Diameter (Decimal Inch) | 0.0060 |
| Bridled | No |
| Pilot | NonPiloted |
| Flared | Flared |
| Maximum RPM | 25000 |
| Shank Diameter (Inch) | 1/4 |
| Encapsulated | Yes |
| Shank Included | Yes |
$26.43
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Osborn - 1-1/2" Brush Diam, Crimped, End Brush - 1/4" Diam Shank, 15,000 Max RPM
Item #: 00126441
Brand: Osborn
Model #: 0003072500
Exact Tooling IR#: 04
Features and Benefits
Steel is the most common filament/wire material due to its durability and cutting action. It is suitable for general purpose applications and can be used on iron, steel, aluminum, brass, copper, and wood.
Crimped brushes provide additional strength compared to straight brushes and are commonly used where a knotted brush's impact would alter the working surface.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 1-1/2 |
| Fill Material | Steel |
| Filament/Wire Diameter Range (Decimal Inch) | 0.0101 - 0.0200 |
| Filament/Wire Diameter (Decimal Inch) | 0.0200 |
| Wire Type | Crimped |
| Bridled | No |
| Pilot | NonPiloted |
| Flared | NonFlared |
| Maximum RPM | 15000 |
| Shank Diameter (Inch) | 1/4 |
| Encapsulated | No |
| Shank Included | Yes |
$15.87
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Anderson - 3" Brush Diam, Crimped, End Brush - 1/4" Diam Shank, 20,000 Max RPM
Item #: 01709708
Brand: Anderson
Model #: 09055
Exact Tooling IR#: 04
Features and Benefits
Steel is the most common filament/wire material due to its durability and cutting action. It is suitable for general purpose applications and can be used on iron, steel, aluminum, brass, copper, and wood.
Crimped brushes provide additional strength compared to straight brushes and are commonly used where a knotted brush's impact would alter the working surface.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 3 |
| Fill Material | Steel |
| Filament/Wire Diameter Range (Decimal Inch) | 0.0101 - 0.0200 |
| Filament/Wire Diameter (Decimal Inch) | 0.0140 |
| Wire Type | Crimped |
| Bridled | No |
| Pilot | NonPiloted |
| Flared | NonFlared |
| Maximum RPM | 20000 |
| Shank Diameter (Inch) | 1/4 |
| Encapsulated | No |
| Shank Included | Yes |
$15.61
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Tanis - 120 Grit, 2-1/2" Brush Diam, Crimped, End Brush - 1/4" Diam Steel Shank, 4,500 Max RPM
Item #: 31890478
Brand: Tanis
Model #: 32345
Exact Tooling IR#: 04
Features and Benefits
Nylon is used in wet and dry environments. It has a low moisture absorption rate and conforms well to surfaces.
Crimped brushes provide additional strength compared to straight brushes and are commonly used where a knotted brush's impact would alter the working surface.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 2-1/2 |
| Fill Material | Nylon |
| Filament/Wire Diameter Range (Decimal Inch) | 0.0201 and Above |
| Filament/Wire Diameter (Decimal Inch) | 0.0400 |
| Wire Type | Crimped |
| Bridled | No |
| Pilot Diameter (Inch) | 0 |
| Pilot | NonPiloted |
| Flared | NonFlared |
| Maximum RPM | 4500 |
| Shank Diameter (Inch) | 1/4 |
| Shank Diameter (mm) | 6 |
| Encapsulated | No |
| Grit | 120 |
| Shank Included | Yes |
| Shank Material | Steel |
| Trim Length (Inch) | 1-3/8 |
$127.26
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DeWALT - 1" Brush Diam, Knotted, End Brush - 1/4" Diam Shank, 20,000 Max RPM
Item #: 65052474
Brand: DeWALT
Model #: DW4902
Exact Tooling IR#: 04
Features and Benefits
Steel is the most common filament/wire material due to its durability and cutting action. It is suitable for general purpose applications and can be used on iron, steel, aluminum, brass, copper, and wood.
Knotted brushes are made up of multiple filaments/wires bundled together to provide the most aggressive brushing action.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 1 |
| Fill Material | Steel |
| Filament/Wire Diameter Range (Decimal Inch) | 0.0101 - 0.0200 |
| Filament/Wire Diameter (Decimal Inch) | 0.0200 |
| Wire Type | Knotted |
| Bridled | No |
| Pilot | NonPiloted |
| Flared | NonFlared |
| Maximum RPM | 20000 |
| Shank Diameter (Inch) | 1/4 |
| Shank Diameter (mm) | 6 |
| Encapsulated | No |
| Hollow Center | No |
| Shank Included | Yes |
$13.54
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Weiler - 1" Brush Diam, Crimped, End Brush - 20,000 Max RPM
Item #: 64711765
Brand: Weiler
Model #: 998238
Exact Tooling IR#: 04
Features and Benefits
Stainless steel is highly corrosion resistant and can be used in high humidity or wet conditions. It has a higher heat tolerance than steel, allowing use at temperatures up to 600 F on aluminum and stainless steel.
Crimped brushes provide additional strength compared to straight brushes and are commonly used where a knotted brush's impact would alter the working surface.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 1 |
| Fill Material | Stainless Steel |
| Filament/Wire Diameter (Decimal Inch) | 0.0200 |
| Wire Type | Crimped |
| Flared | NonFlared |
| Maximum RPM | 20000 |
| Encapsulated | No |
| Hollow Center | No |
| Trim Length (Inch) | 1-1/8 |
$19.58
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Weiler - 3/4" Brush Diam, Crimped, End Brush - 1/4" Diam Steel Shank, 20,000 Max RPM
Item #: 75846832
Brand: Weiler
Model #: 11103
Exact Tooling IR#: 04
Features and Benefits
Steel is the most common filament/wire material due to its durability and cutting action. It is suitable for general purpose applications and can be used on iron, steel, aluminum, brass, copper, and wood.
Crimped brushes provide additional strength compared to straight brushes and are commonly used where a knotted brush's impact would alter the working surface.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 3/4 |
| Fill Material | Steel |
| Filament/Wire Diameter Range (Decimal Inch) | 0.0101 - 0.0200 |
| Filament/Wire Diameter (Decimal Inch) | 0.0104 |
| Wire Type | Crimped |
| Bridled | Yes |
| Pilot | NonPiloted |
| Flared | NonFlared |
| Maximum RPM | 20000 |
| Shank Diameter (Inch) | 1/4 |
| Shank Diameter (mm) | 6 |
| Encapsulated | No |
| Hollow Center | No |
| Shank Included | Yes |
| Shank Material | Steel |
| Trim Length (Inch) | 3/8 |
$22.34
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brush Research Mfg. - 1" Brush Diam, Crimped, End Brush - 1/4" Diam Steel Shank, 20,000 Max RPM
Item #: 13699400
Brand: Brush Research Mfg.
Model #: BNS10ST10
Exact Tooling IR#: 04
Features and Benefits
Stainless steel is highly corrosion resistant and can be used in high humidity or wet conditions. It has a higher heat tolerance than steel, allowing use at temperatures up to 600 F on aluminum and stainless steel.
Crimped brushes provide additional strength compared to straight brushes and are commonly used where a knotted brush's impact would alter the working surface.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 1 |
| Fill Material | Stainless Steel |
| Filament/Wire Diameter Range (Decimal Inch) | Up to 0.0100 |
| Filament/Wire Diameter (Decimal Inch) | 0.0100 |
| Wire Type | Crimped |
| Bridled | Yes |
| Pilot | NonPiloted |
| Flared | NonFlared |
| Maximum RPM | 20000 |
| Shank Diameter (Inch) | 1/4 |
| Encapsulated | No |
| Hollow Center | No |
| Overall Length (Inch) | 2-1/2 |
| Shank Included | Yes |
| Shank Length (Inch) | 3/4 |
| Shank Material | Steel |
| Trim Length (Inch) | 7/8 |
| Brush Diameter (Decimal Inch) | 1 |
| Shank Diameter (Decimal Inch) | 1/4 |
$31.61
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Weiler - 3" Brush Diam, Crimped, Flared End Brush - 1/4" Diam Shank, 16,000 Max RPM
Item #: 75846568
Brand: Weiler
Model #: 10151
Exact Tooling IR#: 04
Features and Benefits
Stainless steel is highly corrosion resistant and can be used in high humidity or wet conditions. It has a higher heat tolerance than steel, allowing use at temperatures up to 600 F on aluminum and stainless steel.
Crimped brushes provide additional strength compared to straight brushes and are commonly used where a knotted brush's impact would alter the working surface.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 3 |
| Fill Material | Stainless Steel |
| Filament/Wire Diameter Range (Decimal Inch) | Up to 0.0100 |
| Filament/Wire Diameter (Decimal Inch) | 0.0060 |
| Wire Type | Crimped |
| Bridled | No |
| Pilot | NonPiloted |
| Flared | Flared |
| Maximum RPM | 16000 |
| Shank Diameter (Inch) | 1/4 |
| Shank Diameter (mm) | 6 |
| Encapsulated | No |
| Hollow Center | No |
| Shank Included | Yes |
$65.46
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brush Research Mfg. - 3/4" Brush Diam, Knotted, End Brush - 1/4" Diam Steel Shank, 20,000 Max RPM
Item #: 13699103
Brand: Brush Research Mfg.
Model #: BNH6ST14
Exact Tooling IR#: 04
Features and Benefits
Stainless steel is highly corrosion resistant and can be used in high humidity or wet conditions. It has a higher heat tolerance than steel, allowing use at temperatures up to 600 F on aluminum and stainless steel.
Knotted brushes are made up of multiple filaments/wires bundled together to provide the most aggressive brushing action.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 3/4 |
| Fill Material | Stainless Steel |
| Filament/Wire Diameter Range (Decimal Inch) | 0.0101 - 0.0200 |
| Filament/Wire Diameter (Decimal Inch) | 0.0140 |
| Wire Type | Knotted |
| Bridled | Yes |
| Pilot | NonPiloted |
| Flared | NonFlared |
| Maximum RPM | 20000 |
| Shank Diameter (Inch) | 1/4 |
| Encapsulated | No |
| Hollow Center | Yes |
| Shank Included | Yes |
| Shank Length (Inch) | 3/4 |
| Shank Material | Steel |
| Trim Length (Inch) | 7/8 |
| Brush Diameter (Decimal Inch) | 3/4 |
| Shank Diameter (Decimal Inch) | 1/4 |
$54.05
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brush Research Mfg. - 80 Grit, 1-1/2" Brush Diam, Crimped, Flared End Brush - Coarse Grade, 1/4" Diam Steel Shank, 2,500 Max RPM
Item #: 15331747
Brand: Brush Research Mfg.
Model #: BMF14AY80SC
Exact Tooling IR#: 04
Features and Benefits
Nylon is used in wet and dry environments. It has a low moisture absorption rate and conforms well to surfaces.
Crimped brushes provide additional strength compared to straight brushes and are commonly used where a knotted brush's impact would alter the working surface.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 1-1/2 |
| Fill Material | Nylon |
| Filament/Wire Diameter Range (Decimal Inch) | 0.0201 and Above |
| Filament/Wire Diameter (Decimal Inch) | 0.0400 |
| Wire Type | Crimped |
| Bridled | No |
| Pilot | NonPiloted |
| Flared | Flared |
| Maximum RPM | 2500 |
| Shank Diameter (Inch) | 1/4 |
| Encapsulated | No |
| Abrasive Material | Silicon Carbide |
| Grit | 80 |
| Grade | Coarse |
| Hollow Center | No |
| Overall Length (Inch) | 3 |
| Shank Included | Yes |
| Shank Length (Inch) | 3/4 |
| Shank Material | Steel |
| Trim Length (Inch) | 1/4 |
| Brush Diameter (Decimal Inch) | 1-1/2 |
| Shank Diameter (Decimal Inch) | 1/4 |
$23.01
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Weiler - 1/2" Brush Diam, Crimped, End Brush - 1/4" Diam Steel Shank, 25,000 Max RPM
Item #: 00462788
Brand: Weiler
Model #: 11010 90300
Exact Tooling IR#: 04
Features and Benefits
Stainless steel is highly corrosion resistant and can be used in high humidity or wet conditions. It has a higher heat tolerance than steel, allowing use at temperatures up to 600 F on aluminum and stainless steel.
Crimped brushes provide additional strength compared to straight brushes and are commonly used where a knotted brush's impact would alter the working surface.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 1/2 |
| Fill Material | Stainless Steel |
| Filament/Wire Diameter Range (Decimal Inch) | Up to 0.0100 |
| Filament/Wire Diameter (Decimal Inch) | 0.0060 |
| Wire Type | Crimped |
| Bridled | No |
| Pilot | NonPiloted |
| Flared | NonFlared |
| Maximum RPM | 25000 |
| Shank Diameter (Inch) | 1/4 |
| Shank Diameter (mm) | 6 |
| Encapsulated | No |
| Hollow Center | No |
| Shank Included | Yes |
| Shank Material | Steel |
| Trim Length (Inch) | 7/8 |
$21.80
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Value Collection - 4" Brush Diam, Flared End Brush - Medium Grade, 1/4" Diam Shank, 15,000 Max RPM
Item #: 74038415
Brand: Value Collection
Exact Tooling IR#: 04
Features and Benefits
Brass is softer than steel and stainless steel and will not scratch harder surfaces. It will not generate sparks when brushing metallic surfaces and works best on copper and brass.
| Product Specifications | |
|---|---|
| Brush Diameter (Inch) | 4 |
| Fill Material | Brass |
| Filament/Wire Diameter Range (Decimal Inch) | 0.0101 - 0.0200 |
| Filament/Wire Diameter (Decimal Inch) | 0.0120 |
| Bridled | No |
| Pilot | NonPiloted |
| Flared | Flared |
| Maximum RPM | 15000 |
| Shank Diameter (Inch) | 1/4 |
| Encapsulated | No |
| Grade | Medium |
| Hollow Center | No |
| Shank Included | Yes |
| Trim Length (Inch) | 1-3/4 |
$8.38
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It